ESTUCHE 50 CUCHILLAS CUTER PEQUEÑO BA-50

- Paint spray gun with 1000 cc bayonet-type aluminium suction feed cup;
- Sandblasted and nickel-plated aluminium lid;
- Feed cup suction pipe in zinc-plated steel ø10x7;
- 11/A connector for spray gun air supply;
- Available with conventional painting system;
- Packaged in box.

- Exceptionally well-suited to surface and edge grinding.
- The fibre backing strengthens the abrasive disc and improves stock removal.
- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.

- Dust and water extraction set.

- Content:
- H2, H2.5, H3, H4, H5, H6, H8, H10.

- Bit for torx head screw;
- Silicon chrome vanadium alloy steel (S2)
- Anti-rust oiled, sand-blasted
- Total length : 25 mm.

- TORX® Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.

- M8 TR-200 mouthpiece - TR208.

- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.

Content: 1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws.