LANCE DE CORRENTE CORTE 1,5MT Ø7,1
Ready to Ship
KLB5-088
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KLB5-088 | |||||
LANCE DE CORRENTE CORTE 1,5MT Ø7,1 |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
MILWAUKEE Multimaterial Drill Bit MM 6,5 x 150mm - 1 pc- Drill bit with 1/4˝ hexagonal shank optimized for impact and hammer drills;
- Hexagonal shank up to 260mm long and 3-slot shank on 400mm long drills;
- Drills with tungsten carbide tip (TCT), allowing drilling in concrete, bricks, aerated concrete blocks, thin metal plates, aluminum, all types of wood and PVC;
- White spiral to easily identify the drill bit in the toolbox.
- Hexagonal shank up to 260mm long and 3-slot shank on 400mm long drills;
- Drills with tungsten carbide tip (TCT), allowing drilling in concrete, bricks, aerated concrete blocks, thin metal plates, aluminum, all types of wood and PVC;
- White spiral to easily identify the drill bit in the toolbox.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread - Fine Pitch DIN 960...- Partial Thread Hexagon Screw - Metric Fine Thread White Zinc plated;
- DIN 960;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 960;
- Material: 8.8;
- Finishing: White Zinc plated.
broca-de-chanfrar-longa-90-fino
BROCA ESCALONADA LONGA
din-7991-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Hexagon Socket Cap Screw Countersunk Head DIN 7991 M6X60...- Hexagon Socket Cap Screw Countersunk Head Plain;
- DIN 7991;
- Material: 10.9;
- Finishing: Plain.
- DIN 7991;
- Material: 10.9;
- Finishing: Plain.
din-934-porca-sextavada
CHEMITOOL FASTENERS Hexagonal Nut DIN 934 M52 |10| Plain- Hexagonal Nut Plain;
- DIN 934;
- Material: |10|;
- Finishing: Plain.
- DIN 934;
- Material: |10|;
- Finishing: Plain.
twist-drill-din-340-n-hss-g
IRWIN Bit HSS PRO with Conical Stem - DIN 345 Ø26x286 mm- The series of conical shank Bits with Morse taper DIN 345 are standard heavy duty Bits that are used with stationary Bits. Designed for a high resistance to breakage;
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.
home
DASSY Monza Two-Tone Work Shorts n.º 40 +/- 245 g/m² Grey/Black'- Two-tone shorts with holster pockets.
- Strong fabric. Practical holster pockets. These short work trousers are up to any job. No matter what the temperature is.
- PESCO 61, +/- 245 G / M²
- Strong fabric. Practical holster pockets. These short work trousers are up to any job. No matter what the temperature is.
- PESCO 61, +/- 245 G / M²
steel-safety-footwear
CHEMITOOL Suzuka Boot S5 SRC nº 40- Light, smart and dynamic design;
- Impact-resistant steel toe cap up to 200J;
- Anti-perforation insole;
- Antibacterial abrasion resistant jersey lining;
- Hydrocarbon resistant, antistatic, and non-slip sole;
- Shock absorption in the heel area;
- High level of slip resistance.
- Impact-resistant steel toe cap up to 200J;
- Anti-perforation insole;
- Antibacterial abrasion resistant jersey lining;
- Hydrocarbon resistant, antistatic, and non-slip sole;
- Shock absorption in the heel area;
- High level of slip resistance.