BOMBA DE LUBRIFICAÇÃO DE MASSA MANUAL

-This product is made of high quality materials to serve you for years to come.

Internal hex drive with a collar-thrust spring. Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

For universal grinding work from fine to very fine grinding on materials which do not conduct heat well, e.g. stainless steel (INOX).
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL

- 6 / 12 points;
- Size combined- 16.0mm (5/8) - 20.8mm (13/16);
- Inside sleeve - rubber / magnet;
- DIN 3120.

- Heat-resistant composite toecap.
- Anti-static double density polyurethane sole.
- Anti-perforation sheet and textile insole.
- Anti-perforation insole.
- Metal-free.

-4t grey high tenacity polyester (PES) flat woven webbing.

- For torx plus tamper screw;
- IPR20 for the operation of the screwed connection of the plug-in pump on MERCEDESBENZ Atego and Actros MAZDA 3 1.4 and 1.6;
- IPR25 for the screwed connections at the control unit and the air flow sensor on VW;
- DIN 3120.

It is a product specially formulated to secure metal bolts and nuts and prevent them from loosening. Fixes screws, scapulae, bolts,nuts, bushes, retainers, washers, bearings, covers, axles, shafts and other fasteners in blocks, breeches, carburetors, transmissions, clutches, steering, gears, differentials, brakes, water, oil and gasoline pumps, dynamos and alternators. Not only does it serveas a fastener, it also acts as an excellent sealant in threaded joints and fittings.