EGAÑA Anti-Vibration Support Low Profile Series with Fixed Screw 5B
Ready to Ship
Add to cart
40,00 €
and shipping is free
Datasheet \ Reference 5B | |||||
EGAÑA Anti-Vibration Support Low Profile Series with Fixed Screw 5B |
|||||
Description- 5B Model; |
|||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
STAHLWILLE Parallel Pin Punch 200x10 mmDIN 6458, octagonal, chrome vanadium, lacquered silver.
home
IRWIN Carbon Steel Snap-Off Blade Bulk 18 mm (100 un.)-A universal configuration fits common knives.
-The tough carbon steel composition keeps its edge despite heavy use.
-The tough carbon steel composition keeps its edge despite heavy use.
home
ANi Male Threaded Connector With Spring 61/MG 3/8M ø 5 x 8 mm- Cylindrical male thread ISO 228 (BSPP);
- MG = Swivelling.
- MG = Swivelling.
home
STAHLWILLE 3/4' IMPACT Socket Extra Deep 34 mm3/4 Inside Square-drive, ISO 1711-2, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.
home
STAHLWILLE 1/2' Screwdriver Socket with Ribe-CV® Screw nº 54CV Size M14For spline socket head screws (Ribe-CV®), Chrome Alloy Steel, chrome plated.
home
ANi Male/Female Threaded German Profile Quick Fitting 15/A OMNI 3/8 F- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21;
- Cylindrical female thread- ISO 228 (BSPP);
- Carbonitrided and zinc-plated steel;
- COMPATIBILITY CEJN 320- RECTUS 26. MILTON 760, 761, 762, 763.
- Cylindrical female thread- ISO 228 (BSPP);
- Carbonitrided and zinc-plated steel;
- COMPATIBILITY CEJN 320- RECTUS 26. MILTON 760, 761, 762, 763.
home
MILWAUKEE SDS-Max 22 x 1320 - 1 pc Drill Bits - 4 Cut- Genuine MILWAUKEE accessories;
- Large carbide tip with patented rebar chamfers. Ensures lower vibration and optimised drilling performance when hitting reinforced steel equalling longer life time;
- Especially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip. Reduces jamming up on hitting reinforcingsteel;
- Centering point with 130° point angle. Easy spot drilling with pinpoint accuracy and ensures optimum guidance during drilling.
- Large carbide tip with patented rebar chamfers. Ensures lower vibration and optimised drilling performance when hitting reinforced steel equalling longer life time;
- Especially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip. Reduces jamming up on hitting reinforcingsteel;
- Centering point with 130° point angle. Easy spot drilling with pinpoint accuracy and ensures optimum guidance during drilling.
home
KING TONY Spline XZN® Bit M6 36mm- Spline XZN® Bit;
- Silicon chrome vanadium alloy steel (S2);
- 10mm hexagon socket;
- Anti-rust oiled, sand-blasted.
- Silicon chrome vanadium alloy steel (S2);
- 10mm hexagon socket;
- Anti-rust oiled, sand-blasted.