DREMEL 6,4 mm High Speed Cutter 26150125JA- 2 Pieces
Ready to Ship
DR26150125JA
- 6,4 mm High Speed Cutter 26150125JA- 2 Pieces;
- Larger head with triangular shape;
- High-speed cutters are suitable for removing material in applications such as shaping, sculpting, engraving, cavity digging, grooving, grooving, inlaying, cuneiform holes or freehand milling.
- Use the sides of the head for an effective result;
- The most used handle for this accessory is the pencil type handle;
- A less aggressive and less frequent pass will always produce better results than pushing too hard or forcing the tool against thematerial;
- Use it with an angle less than 90'.
- Larger head with triangular shape;
- High-speed cutters are suitable for removing material in applications such as shaping, sculpting, engraving, cavity digging, grooving, grooving, inlaying, cuneiform holes or freehand milling.
- Use the sides of the head for an effective result;
- The most used handle for this accessory is the pencil type handle;
- A less aggressive and less frequent pass will always produce better results than pushing too hard or forcing the tool against thematerial;
- Use it with an angle less than 90'.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference DR26150125JA | |||||||||
DREMEL 6,4 mm High Speed Cutter 26150125JA- 2 Pieces |
|||||||||
|
Description- 6,4 mm High Speed Cutter 26150125JA- 2 Pieces; |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 4,50mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 340 Tipo N, HSS-G (Ø 8,00mm)- Main use Steel (N / mm ²) <900, Steel (N / mm ²) <1100
- Secondary use Steel (N / mm ²) <1300, aluminum, brass, bronze, synthetic materials and cast iron
- Secondary use Steel (N / mm ²) <1300, aluminum, brass, bronze, synthetic materials and cast iron
home
STAHLWILLE Spare Hacksaw Blades for Hacksaw Frame nº 120536 pieces, Chrome Alloy Tool Steel, 32 teeth per inch.
thread-inserts-m
INSERTO ROSCADO M6 X 1,0
rolling-bearings
ROLAMENTO - 6201
din-934-porca-sextavada
CHEMITOOL FASTENERS Hexagonal Nut BS 1083 (DIN 934) 5/16' |6| Plain- Hexagonal Nut Plain;
- DIN 934;
- Material: |6|;
- Finishing: Plain.
- DIN 934;
- Material: |6|;
- Finishing: Plain.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M12X50 8.8 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
home
BOSCH 132x450mm Diamond Wet Core Cutter for Concrete- Suitable for use with diamond bits designed for wet drilling
- The Diamond Wet Core Cutter for Concrete offers a long service life during wet drilling in concrete;
- The drill bit segments are laser-welded, which provides the desired strength and durability during drilling;
- The premium blend of diamonds and an optimized bond offer long-lasting use;
- In addition, the segments at the top of the core bit provide an easy start during drilling;
- This makes it possible to drill electrical installations, heating pipes, sanitary pipes, centering holes for anchors and so on;
- This wet drill bit is intended for concrete and reinforced concrete.
- The Diamond Wet Core Cutter for Concrete offers a long service life during wet drilling in concrete;
- The drill bit segments are laser-welded, which provides the desired strength and durability during drilling;
- The premium blend of diamonds and an optimized bond offer long-lasting use;
- In addition, the segments at the top of the core bit provide an easy start during drilling;
- This makes it possible to drill electrical installations, heating pipes, sanitary pipes, centering holes for anchors and so on;
- This wet drill bit is intended for concrete and reinforced concrete.