GARTEC Tap for Oil Bar
Ready to Ship
GTCNV9014
- Tap for oil bar complete with fittings
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference GTCNV9014 | |||||||
GARTEC Tap for Oil Bar |
|||||||
|
Description- Tap for oil bar complete with fittings |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
TERRAX by RUKO 19-Piece Set of Twist Drills DIN 338 Type N, HSS-G in Steel Case- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
medidores-de-humidade
RIDGID Micro HM-100 Temperature Humidity Meter
serras-de-podar
DEWALT XR 18V Brushless Pruning Saw with 5Ah Li-Ion Battery- 20cm (8) blade length - ideal for pruning applications;
- Tip with metal cutting guard - for control and safety during application;
- Automatic lubrication - keeps the blade and chain lubricated during use.
- Tip with metal cutting guard - for control and safety during application;
- Automatic lubrication - keeps the blade and chain lubricated during use.
home
KING TONY 3 Pieces Pliers Module Set- Content:
- Combination Pliers: 188 mm;
- Diagonal Cutting Pliers: 163 mm;
- Tip Pliers: 164 mm.
- Combination Pliers: 188 mm;
- Diagonal Cutting Pliers: 163 mm;
- Tip Pliers: 164 mm.
countersinker-din-335-c-90-hss
CHEMITOOL CUTTING 90º Countersinker Din335C HSS M2 Ø16,5mm- Excellent quality/value ratio.
- Fully ground in M35 High Speed Steel.
- TiAlN Coating.
- 3 cutting edges.
- Excellent chamfering ability.
- Breakage resistance.
- Long tool life.
- Fully ground in M35 High Speed Steel.
- TiAlN Coating.
- 3 cutting edges.
- Excellent chamfering ability.
- Breakage resistance.
- Long tool life.
home
PFERD Combiclick Fibre Discs Ceramic Oxide Grain CO G60 180 mm- For aggressive grinding with a very high stock removal rate and very long tool life.
- The ceramic oxide grain is specifically designed for work on hard materials and layers.
- Abrasive: Ceramic oxide grain CO.
- Recommendations for use: Use powerful angle grinders.
- The ceramic oxide grain is specifically designed for work on hard materials and layers.
- Abrasive: Ceramic oxide grain CO.
- Recommendations for use: Use powerful angle grinders.
home
DASSY Felix Sweatshirt 2XL +/- 290 g/m² Navy'- Not your average sweater, but a robust work sweatshirt thanks to the reinforced seams at neck, shoulders and sleeves. Open the short zip to easily put it on or take it off and close the zip to regulate the temperature. The neutral design and wear-resistant fabric make the DASSY® Felix your perfect partner for personalisation with embroidery or printing.
- COPES 80, +/- 290 G/M²
- COPES 80, +/- 290 G/M²
home
DASSY Dusseldorf High Visibility Work Jacket 2XL +/- 290 g/m² Fluo Orange/Navy'- Highly visible at work with this high vis work jacket. Count on a certified protection class 3* thanks to fluorescent main fabric and the reflective tape.
- PESCO 74 - HIVIS FABRIC, +/- 290 G/M²
- PESCO 74 - HIVIS FABRIC, +/- 290 G/M²
rolling-bearings
ROLAMENTO - 7202 BETN
home
PFERD Rubber Drum Holders Cylindrical GK 0810/6- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.