SOMTA Pipe Tap BSP HSS 1,1/4 (SET)
Available
5713170
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 5713170 | |||||||||
SOMTA Pipe Tap BSP HSS 1,1/4 (SET) |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
KING TONY H4 T-Handle Wrench- T - handle wrench, 6 Point for hexagon head screw;
- The handle pin can be removed for another wrench;
- Material - Chrome vanadium steel;
- Finishing - chrome plated.
- The handle pin can be removed for another wrench;
- Material - Chrome vanadium steel;
- Finishing - chrome plated.
home
PFERD BA 100x282mm Z40 Zirkon Abrasive Belt- High tear resistance with optimal flexibility;
- Consistent work results due to very good grain adhesion;
- High economic efficiency due to high grinding performance and service life.
- Consistent work results due to very good grain adhesion;
- High economic efficiency due to high grinding performance and service life.
home
DASSY Dakota Flame Retardant Brace Overall n.º 54 +/- 340 g/m² Grey'- Flame retardant brace overall with knee pockets
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
pneumatics
ANILHA 5208704
din-9021a-anilha-de-chapa-plana
CHEMITOOL FASTENERS Flat Washer DIN 9021A M10 140HV Yellow Passivated-Wide flat washer DIN 9021 M10 4.8 Passivated Yellow.
torno-de-bancada-oficina
IRWIN Engineers Vice 150 mm- IRWIN® ENGINEERS’ VICES;
- Safety stop;
- Fully machined;
- Fused steel handle;
- Quick-release mechanism;
- Unbreakable sg iron nut;
- Integral anvil.
- Safety stop;
- Fully machined;
- Fused steel handle;
- Quick-release mechanism;
- Unbreakable sg iron nut;
- Integral anvil.
home
PFERD Ø8x12mm GHR Hard SIC/G120 Cylindrical Poliflex Grinding Pin- Produces very good surface quality;
- High economic efficiency thanks to long tool life and high stock removal rate;
- Maximum working convenience through precise concentricity;
- Produces a fine, shiny surface finish;
- Soft grinding with a longer tool life.
- High economic efficiency thanks to long tool life and high stock removal rate;
- Maximum working convenience through precise concentricity;
- Produces a fine, shiny surface finish;
- Soft grinding with a longer tool life.
