LORCH feed roller 0,6 / 0,8 steel (type 37)
Available
LR62089600
The drive rollers of the wire feeder units must conform to the welded wire. The 4 roller unit of these systems always requires 2 feed rollers.
Suitable for: M-Pro 170/210/250/300/150 CuSi / 200 CuSi / and M 222/242
Suitable for: M-Pro 170/210/250/300/150 CuSi / 200 CuSi / and M 222/242
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference LR62089600 | |||||||
LORCH feed roller 0,6 / 0,8 steel (type 37) |
|||||||
|
DescriptionThe drive rollers of the wire feeder units must conform to the welded wire. The 4 roller unit of these systems always requires 2 feed rollers. |
||||||
PRODUCTS DATA
|
|||||||
SPECIFICATIONS
|
|||||||
16 other products in the same category:
tungsten-carbide-burr-d-ball-kud
FRESA TUNGSTÉNIO KUD 12X10-Ø6 C-1.
home
3,0 mm x 150 mm x 1 pc-With the new handle design, even more ergonomic, the T Key is more efficient and comfortable.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M14x200 8.8...- Hexagon Cap Screw Cylindrical Head White Zinc plated;
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 11,5 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
din-125a-anilha-de-chapa-plana
CHEMITOOL FASTENERS Flat Washer DIN 125A M3 Brass Plated- Flat Washer Brass Plated;
- DIN 125A;
- Finishing: Brass Plated.
- DIN 125A;
- Finishing: Brass Plated.
din-7991-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Hexagon Socket Cap Screw Countersunk Head DIN 7991 M14X40...- Hexagon Socket Cap Screw Countersunk Head White Zinc plated;
- DIN 7991;
- Material: 10.9;
- Finishing: White Zinc plated.
- DIN 7991;
- Material: 10.9;
- Finishing: White Zinc plated.
rebaixador-guia-fixa-din-373-fino
ESCARIADOR DIN373 M6
cutting-tools
LIMA 1157 100 MM H2
chaves-de-parafusos-fenda
STAHLWILLE Workshop Screwdriver DRALL Parallel Blades Size 4Parallel blades, as per VSM (Swiss Standard), Chrome Alloy Steel, chrome plated, black tips.
steel-safety-footwear
CHEMITOOL Boot Jerez S4 SRC nº 42- High resistance against grease and oils;
- Suitable for use in food preparation segments;
- Antibacterial, abrasion-resistant jersey lining;
- Non-slip sole with shock absorption in the heel area.
- Suitable for use in food preparation segments;
- Antibacterial, abrasion-resistant jersey lining;
- Non-slip sole with shock absorption in the heel area.
sds-plus-hammer-drill-3-cutters
DeWalt SDS Plus Extreme Bit 2 Cuts Industrial Pack 12x200mm (10 Units)- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.