CONJ. 6 CHAVES DE FENDA PRECISÃO FIXAS
Available
STHT0-62632
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference STHT0-62632 | |||||||
CONJ. 6 CHAVES DE FENDA PRECISÃO FIXAS |
|||||||
|
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø11X260MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
home
KING TONY 1/4' M8 XZN® Bit- Silicon chrome vanadium alloy steel (S2)
- Anti-rust oiled, sand-blasted
- Total length : 25 mm;
- DIN 65254.
- Anti-rust oiled, sand-blasted
- Total length : 25 mm;
- DIN 65254.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Dark (Ø 6,60mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
oil-free-direct-driven-air-compressors
CHEMITOOL TOOLS Compressor Silencer 24L 8BAR- Professional quality.
- Portable.
- Light and easy to carry.
- Oil-free.
- High air production capacity with lower power consumption.
- Reduced starting peak.
- Portable.
- Light and easy to carry.
- Oil-free.
- High air production capacity with lower power consumption.
- Reduced starting peak.
stanley-black-decker
TAMPA/TAMPÃO
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M6X130 8.8 Plain- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
home
KING TONY 45° Metric Offset Combination Wrench 15 mm45º angle combination spanner made of chrome vanadium steel with chrome and polished finish, offering resistance and durability. Ithas fixed and splined combining bits with the same gauge. The wrench has a fixed side and a star side. It is recommended for tightening and loosening screws and nuts.
home
KING TONY 1/2' Socket Set with Accessories 43 (un.) 4542CR02-KING TONY socket wrench set, 1/2 inch unit, 6 points, 43 pieces.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M30x180 12.9...- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M16X90 12.9 Plain- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
home
DeWalt 1/4 Mesh Sanding Sheet G240- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
serra-craneana-hss-bimetalica-co-8
CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø98MM 8% Cobalt- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.