KING TONY 30 mm 14x18 mm Ring Insert Tools

- Genuine MILWAUKEE accessories;
- Supplied in: Plastic case;
- 100% Faster- Speed and time savings are achieved due to the following factors. Firstly the annular cutter principle of only -cutting material from the periphery of the hole as opposed to the twist drill which must cut the complete diameter of the hole. Secondlythe benefit of two aggressive sharp angles per cutting edge help to achieve faster feed rates and lower cutt-ing resistance;
- 30% More productivity- Because the annular cutter is only cutting material from the periphery of the hole. Less motor energy and driving power is required. The larger the drill diameter the greater the energy saving.

-Elbow Deep Ring 75°,thin wall ring,chrome vanadium alloy steel,chrome plated.

- 15/A italian profile quick fitting with spring;
- Nickel plated brass / Zinc-plated steel.

- Socket adapter ideal for screwguns;
- Ball retainer type;
- DIN 7428.

The SiC abrasive enables use on paint and glass.
- Particularly suitable for all wet grinding work on conventional painted constructions.
- The paper-backed abrasive sheets comply with ISO 21948.

- Suitable for external circlips (shafts) Type B.

- Genuine MILWAUKEE accessories;
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal;
- Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².

- Material: Chrome molybdenum alloy steel;
- Finishing: Phosphate sunk.

-Cycling set, breathable microfiber short sleeve jersey, long zip covered, three back pockets, silicone rubber at bottom of jersey;Lycra shorts, silicone elastic at bottom of leg, highly breathable antibacterial crotch.

- Standard extension bar with ball;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.