STAHLWILLE Socket 1/2' nº 50 19 mm
Ready to Ship
S03010019
metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ® high performance steel, chrome plated.
Buy more
40,00 €
and shipping is free
Datasheet \ Reference S03010019 | |||||||||||||
STAHLWILLE Socket 1/2' nº 50 19 mm |
|||||||||||||
Descriptionmetric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ® high performance steel, chrome plated. |
|||||||||||||
PRODUCTS DATA
|
|||||||||||||
SPECIFICATIONS
|
16 other products in the same category:
home
MOLAhome
STAHLWILLE 1/4' TORX T40 Bit with Hollow PointWith hollow point for inside TORX® screws (TORX® TAMPER RESISTANT).
home
MILWAUKEE SDS-Plus MX4 24 x 450 - 1 pc Drill Bits - 4 Cut- Genuine MILWAUKEE accessories;
- Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting;
- 4 flute geometry. The high volume 4 flute geometry ensures the optimum removal of dust and debris;
- Centering tip for easy spot drilling with pinpoint accuracy;
- Made in Germany.
- Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting;
- 4 flute geometry. The high volume 4 flute geometry ensures the optimum removal of dust and debris;
- Centering tip for easy spot drilling with pinpoint accuracy;
- Made in Germany.
home
KRAFFT 1l Oil TreatmentCompletely oil-soluble treatment, designed to improve the viscosity characteristics of oils at high temperature and to prevent leakage from rubber/neoprene seals.
home
DeWalt 1/2 Mesh Sanding Sheet 115 x 228mm G120- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.