DeWalt Burrs Groove Cutter 6mm
Available
DT90002
- For straight cuts and grooves in plywood, MDF, HDF, hardwoods and agglomerates.
- Tough and long- lasting.
- Original DeWalt quality.
- Tough and long- lasting.
- Original DeWalt quality.
Add to cart
40,00 €
and shipping is free
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference DT90002 | |||||||||||
DeWalt Burrs Groove Cutter 6mm |
|||||||||||
|
Description- For straight cuts and grooves in plywood, MDF, HDF, hardwoods and agglomerates. |
||||||||||
PRODUCTS DATA
|
|||||||||||
SPECIFICATIONS
|
|||||||||||
16 other products in the same category:
home
PFERD Ø8x12mm GHR Hard SIC/G120 Cylindrical Poliflex Grinding Pin- Produces very good surface quality;
- High economic efficiency thanks to long tool life and high stock removal rate;
- Maximum working convenience through precise concentricity;
- Produces a fine, shiny surface finish;
- Soft grinding with a longer tool life.
- High economic efficiency thanks to long tool life and high stock removal rate;
- Maximum working convenience through precise concentricity;
- Produces a fine, shiny surface finish;
- Soft grinding with a longer tool life.
home
Dewalt POWER-TOOLS Extreme Bi-metal Crown Ø60MM- Up to 2X Longer Life* *vs previous generation DEWALT Bi-Metal Crowns;
- Patented tooth shapes optimize chip removal for efficient drilling and long life;
- Quick cap ejection.
- Patented tooth shapes optimize chip removal for efficient drilling and long life;
- Quick cap ejection.
home
PFERD Shank Mounted Cup Brushes, Crimped - Steel Wire (ST) TBU 5010/6 ST 0,30...- Universally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint.
- Particularly suitable for brushing on large, flat and easily accessible surfaces due to facedown use with the entire brush face applied to the workpiece.
- Particularly suitable for brushing on large, flat and easily accessible surfaces due to facedown use with the entire brush face applied to the workpiece.
din-741-cerra-cabos
CHEMITOOL FASTENERS Wired Rope Clips DIN 741 3 C15 White Zinc plated- Wired Rope Clips White Zinc plated;
- DIN 741;
- Material: C15;
- Finishing: White Zinc plated.
- DIN 741;
- Material: C15;
- Finishing: White Zinc plated.
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø16X160MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M3X6 8.8 White...- Hexagon Cap Screw Cylindrical Head White Zinc plated;
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
sapato-de-seguranca-composito
CHEMITOOL SAFETY New Banjul Nubuck S3S Fiberglass PU SR nº 45 Black Shoes- Three-dimensional mesh (sandwich), which provides better heat fluidity inside the shoe.
- Symmetrically positioned seams to ensure a fixed and resistant structure.
- Symmetrically positioned seams to ensure a fixed and resistant structure.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 133X87MM Ø10,25 DIN338 HSS-G BLACKLABEL Spiral Fully Ground...- High Speed Steel M2;
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
home
INDASA Disc Rhynogrip White Line D125 8F P320- Looking for a complete abrasive with Velcro fastening? Choose Rhynogrip White Line.
home
STAHLWILLE BITS Screwdriver for Slotted Screws 0,6 x 4,5 mmDIN 3127/ISO 2351, for slotted screws.
home
KING TONY PH1 PHILLIPS® Power Bit 150mm- Power driving 1/4 PHILLIPS® head;
- Short neck (9.5 mm) type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- Short neck (9.5 mm) type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
