PARAF.TIREFONDS C/6 10X45
Available
532454
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 532454 | |||||||
PARAF.TIREFONDS C/6 10X45 |
|||||||
 |
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
disco-de-fibra-para-inox
PFERD Fibre Discs Fibre Discs FS Aluminium Oxide A-COOL G60 125 mm- For universal grinding work from fine to very fine grinding on materials which do not conduct heat well, e.g. stainless steel (INOX).
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.
carbide-cutting-straight-shank-drill
DeWalt Mansory Drill Bit 16x150mm- Rotary/percussion masonry drill bit 130° Douglas form carbide tip.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
broca-cilindrica-helicoidal-granito
IRWIN Rotary Percussion Granite Bit Masonry Ø8x200 mm- For percussion Bit;
- Extremely hard and wear resistant carbide tip;
- Masonry professionals;
- Cutting edges of special design.
- Extremely hard and wear resistant carbide tip;
- Masonry professionals;
- Cutting edges of special design.
home
KING TONY 1/4' 20~100 in.lb. Heavy Duty 72 Teeth Adjustable Torque Wrench-72 Teeth 1/4' 20~100 in.lb.
home
STAHLWILLE Socket 1/2' nº 50a 9/16'metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ® high performance steel, chrome plated.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Round Head Wood Screw DIN 96 N17 2,5X12 Brass- Slotted Raised Countersunk Head Wood Screws Brass;
- DIN 96;
- Finishing: Brass.
- DIN 96;
- Finishing: Brass.
laminas-para-madeira
SERRA TICO-TICO (5P)
formwork-drill-chrome-vanadium
BROCA P/COFRAGEM EM CV
home
PFERD High Performance MICRO Ø12x25mm WRC Cylindrical Carbide Burr- High surface quality;
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
