din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagonal Screw UNF 3/8X3.3/4 ANSI B1821-Hexagonal UNF Screw 3/8X3.3/4 ANSI B1821.
CHAVE UMB. 7 S/M
Ready to Ship
486356
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 486356 | |||||||
CHAVE UMB. 7 S/M |
|||||||
 |
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
sbd-spare-parts
SUBCONJ. MÓDULO CONTROLO
home
STANLEY Pilot Drills with Countersink 12x80mm- Pilot Drills with Countersink 12x80mm;
-The STANLEY pilot drill with built-in countersink is ideal for drilling pilot holes and countersinking in wood.
-The STANLEY pilot drill with built-in countersink is ideal for drilling pilot holes and countersinking in wood.
interruptores
MOTOR E INTERRUPTOR
eixos-flexiveis
EIXO COMPLETO 7 ZGU DIN10 2,0M
lamela-de-perno-para-acabamento-misto
CHEMITOOL CUTTING Ø40x20x6|6×30mm A180 Mixed Shaft Mounted Flap Wheel- High profitability;
- Excellent adaptation to contours;
- Cool grinding and low thermal load of the workpiece;
- Less vibration and noise;
- Satin finish;
- Without leaving marks;
- No tool clogging;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A + Non-Woven (Scotch);
- Suitable for: Aluminium, Brass, Copper, Nickel, Stainless Steel (INOX) and Titanium, Ceramic, Glass and Plastic.
- Excellent adaptation to contours;
- Cool grinding and low thermal load of the workpiece;
- Less vibration and noise;
- Satin finish;
- Without leaving marks;
- No tool clogging;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A + Non-Woven (Scotch);
- Suitable for: Aluminium, Brass, Copper, Nickel, Stainless Steel (INOX) and Titanium, Ceramic, Glass and Plastic.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M6X75 8.8 Plain- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.