BUCHA HG 10 (635300)
Ready to Ship
490260
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 490260 | |||||||
BUCHA HG 10 (635300) |
|||||||
 |
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
PFERD Shank Mounted End Brushes, Crimped - Brass Wire (Mes) PBU 1516/6 Mes 0,30- Suitable for light brushing such as deburring, cleaning and derusting.
din-936-porca-sextavada
CHEMITOOL FASTENERS Hexagonal Thin Nut DIN 936 M24 |6| White Zinc plated- Hexagonal Thin Nut White Zinc plated;
- DIN 936;
- Material: |6|;
- Finishing: White Zinc plated.
- DIN 936;
- Material: |6|;
- Finishing: White Zinc plated.
chaves-de-parafusos-torx
KING TONY TORX® Screwdriver T20 100mm- Screwdriver for TORX® head screw with round shank;
- Intern TORX®.
- Intern TORX®.
aco-38-hrc-desbaste-de-bordo
MO MONTADA B53 3 AR 100 O 5V
case-sets
CHEMITOOL CUTTING Set of 170 DIN338 HSSE-G M35 (5% Cobalt) Ø1-10mm Spiral...- Set of 170 pieces;
- 5% Cobalt M35;
- Fully ground;
- Ambar finishing;
- Premium performance in stainless steel;
- Available from 1,0 to 13mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel with 5% Cobalt;
- Suitable for: Stainless steel, steel, aluminum, and non-ferrous metals;
- Compatible Machine: Handheld drill machine, bench drill machine.
- 5% Cobalt M35;
- Fully ground;
- Ambar finishing;
- Premium performance in stainless steel;
- Available from 1,0 to 13mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel with 5% Cobalt;
- Suitable for: Stainless steel, steel, aluminum, and non-ferrous metals;
- Compatible Machine: Handheld drill machine, bench drill machine.
din-963-parafuso-cabeca-embeber-fn
CHEMITOOL FASTENERS Slotted Countersunk Head Screw DIN 963 M8X50 A2 white...- Slotted Countersunk Head Screw Passivated Stainless Steel;
- DIN 963;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 963;
- Material: A2;
- Finishing: Passivated Stainless Steel.
abracadeira-reforcada-isofonica-m8m10
CHEMITOOL FASTENERS Reinforced Clamp M8/M10 LV083 Ø180 Steel W1-Bracket made of 2 mm thick steel plate.
-It has a nut welded on the lower part that allows the application of rods or screws, M8 or M10.
-It has a nut welded on the lower part that allows the application of rods or screws, M8 or M10.
din-7971c-parafuso-cabeca-queijo-fenda
CHEMITOOL FASTENERS Tapping Screw Pan Head Slotted DIN 7971C 3,5x9,5 A2...- Tapping Screw Pan Head Slotted Passivated Stainless Steel;
- DIN 7971C;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 7971C;
- Material: A2;
- Finishing: Passivated Stainless Steel.
home
PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G120 6 x 305 mmFor aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
home
PFERD Universal 3 Plus Milling Cutter Ø10x20mm SPG Sharp Arc- Good cutting performance due to optimal coordination of carbide, geometry and toothing;
- Long service life;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive;
- High surface quality.
- Long service life;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive;
- High surface quality.
home
DASSY Kaluga High Visibility Fleece Jacket 2XL +/- 280 g/m² Fluo Orange'- This full zip hi-vis fleece jacket offers a certified protection class 3. The microfibre fleece will keep you comfortable and warm, while its safety yellow or safety orange colour keeps you highly visible!
- PES 12 - HIVIS FABRIC, +/- 280 G/M²
- PES 12 - HIVIS FABRIC, +/- 280 G/M²
lamela-de-nucleo-para-metal
LAMELA FR 15030/25,4 A 240
twist-drill-din-338-n-hss-g
RUKO Spiral Bits Disassembly DIN 338 Type N, HSS-G (Ø 18,50mm)- Main application Steel (N / mm ²) <900
- Secondary application Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, synthetic materials and cast iron
- Secondary application Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, synthetic materials and cast iron
bi-metal-hss-hole-saw
CHEMITOOL CUTTING HSS M3 Bimetal Hole Saws Ø28MM- Great quality/value ratio;
- Available from diameter 14 to 210mm;
- Variable toothing (4-6TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M3 high speed steel;
- Suitable for: Wood, plastic, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 210mm;
- Variable toothing (4-6TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M3 high speed steel;
- Suitable for: Wood, plastic, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.