LAMELA PERNO 50X10X6*G100
Available
781931
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference 781931 | |||||
LAMELA PERNO 50X10X6*G100 |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
cutting-tools
BROCA PEDRA LONG.30X600
safety-helmets
CHEMITOOL SAFETY Red High Density Polyethylene Helmet with visor- 6 ventilation holes.
- Injected polyethylene harness with 6 fixing points.
- Sweat band.
- Harness with manual adjustment by means of a cogwheel.
- Injected polyethylene harness with 6 fixing points.
- Sweat band.
- Harness with manual adjustment by means of a cogwheel.
fita-de-serra-para-metal
LENOX 5800x41x1,27 Z2/3 Classic Saw Band- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
home
BRALO Sealed Rivet with Boolean Head Aluminium/Stainless Steel 4X10MM- The joints are completely sealed to fluids, avoiding leakage of liquids or vapours, due to the locking of the mandrel head insidethe rivet body.
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
lamela-de-perno-para-acabamento-misto
CHEMITOOL CUTTING Ø80x50x6|6×30mm A100 Mixed Shaft Mounted Flap Wheel- High profitability;
- Excellent adaptation to contours;
- Cool grinding and low thermal load of the workpiece;
- Less vibration and noise;
- Satin finish;
- Without leaving marks;
- No tool clogging;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A + Non-Woven (Scotch);
- Suitable for: Aluminium, Brass, Copper, Nickel, Stainless Steel (INOX) and Titanium, Ceramic, Glass and Plastic.
- Excellent adaptation to contours;
- Cool grinding and low thermal load of the workpiece;
- Less vibration and noise;
- Satin finish;
- Without leaving marks;
- No tool clogging;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A + Non-Woven (Scotch);
- Suitable for: Aluminium, Brass, Copper, Nickel, Stainless Steel (INOX) and Titanium, Ceramic, Glass and Plastic.
