Acessório p/Ejector 393.14-20 060
Available
10893385
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference 10893385 | |||||
Acessório p/Ejector 393.14-20 060 |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
DASSY Knoxville Stretch Work Jeans n.º 40 Plus +/- 390 g/m² Blue'- Stretch work jeans with knee pockets.
- CO 94, 11,5 OZ (+/- 390 G/M²)
- CO 94, 11,5 OZ (+/- 390 G/M²)
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 4,5 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
cutting-tools
PFERD Combidisc Abrasive Discs Aluminium Oxide A-Flex CDR G80 38 mm- Particularly flexible abrasive discs, which are especially suitable for work on contours and concave surfaces, e.g. in tool and mould-making.
- For achieving seamless transitions in the surface finish.
- Abrasive: Aluminium oxide A-FLEX.
- For achieving seamless transitions in the surface finish.
- Abrasive: Aluminium oxide A-FLEX.
cutting-tools
PFERD Combidisc Abrasive Discs Aluminium Oxide A-Plus CD G36 75 mm- For universal applications from coarse to fine grinding.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
aco-inox-desbaste-de-superficie
MUELA CONICA KE 2545 ADW G30 L 6B
bucha-metalica-ch-parafuso-sextavado
CHEMITOOL FASTENERS Sleeve Anchor for Medium Loads with Flat Head Screw lV056...-Bushing CH Screw C/E 10.9 M6X60.
macho-maquina-din-374c-35-cego
CHEMITOOL CUTTING M8 Machine Tap DIN374 – Type C HSSE Co5- Excellent quality/value ratio;
- Easy to use;
- DIN 374;
- Type C;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M8;
- Material: HSSE 5% Cobalt.
- Easy to use;
- DIN 374;
- Type C;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M8;
- Material: HSSE 5% Cobalt.
