Acessório 5313 033-01
Ready to Ship
10894214
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference 10894214 | |||||
Acessório 5313 033-01 |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
KING TONY Ball Hex Key Long Arm 5/16'- Long arm with ball point type;
- DIN ISO 2936;
- Material - SNCM - V alloy steel;
- Finishing - chrome plated.
- DIN ISO 2936;
- Material - SNCM - V alloy steel;
- Finishing - chrome plated.
home
STAHLWILLE Socket 1/4' nº 40L 4,5 mmExtra deep, DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3710, E DIN EN 3709 (test loads), HPQ® high performance steel, chrome plated.
twist-drill-din-338-n-hss-g
RUKO Twist Drill 12,8mm DIN 338 type N, HSS RolledHigh-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.
Thanks to the split point, this drill has good centring properties and requires little pressure.
half-masks
CHEMITOOL SAFETY 755 Double Half Mask with P3 Filters- Semi mask in soft thermoplastic rubber.
- 2 Reusable and interchangeable filters providing less resistance to breathing.
- Adjustable neck band.
- Compatible with 755/756 filters for gases, vapours, particulates and combined.
- 2 Reusable and interchangeable filters providing less resistance to breathing.
- Adjustable neck band.
- Compatible with 755/756 filters for gases, vapours, particulates and combined.
sds-plus-hammer-drill-2-cutters
IRWIN Construction Bit SPEEDHAMMER PLUS IRWIN Ø17x210 mmSpeed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Countersunk Head Wood Screw DIN 97 3/4X7 Brass- Slotted Countersunk Head Wood Screw Brass;
- DIN 97;
- Finishing: Brass.
- DIN 97;
- Finishing: Brass.
fasteners-and-fixings
CHEMITOOL FASTENERS Hexagonal Screw BSW 1/4X3 ANSI B1821
serra-craneana-hss-bimetalica-co-8
CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø70MM 8% Cobalt- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
home
STAHLWILLE Universal Alignment Tool for Automobile Doors 720 mmScope of application:
Almost all car and van doors, boot lids and hatchback doors.
The application for this tool is door locks and door guide pins.
Also suitable on door lock shackles, i.e. as on Opel and Mercedes-Benz.
The universal alignment tool is supplied with 3 different, interchangeable special bolts, housed within the tubular handle.
The handle bend is reinforced by a twin tube.
Almost all car and van doors, boot lids and hatchback doors.
The application for this tool is door locks and door guide pins.
Also suitable on door lock shackles, i.e. as on Opel and Mercedes-Benz.
The universal alignment tool is supplied with 3 different, interchangeable special bolts, housed within the tubular handle.
The handle bend is reinforced by a twin tube.
