Past. U-Lock R166.0L-16MM01-250 S10
Ready to Ship
10275252
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference 10275252 | |||||
Past. U-Lock R166.0L-16MM01-250 S10 |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
catrabucha-com-haste-arame-ondulado
CHEMITOOL PROBRUSH Crimped Brass Steel Cup Brush With Shaft 75mm- 0,5mm crimped steel;
- Available in 50 and 75mm diameter;
- Fine finish;
- Ideal for flat and corners;
- High profitability;
- Long tool life.
- Available in 50 and 75mm diameter;
- Fine finish;
- Ideal for flat and corners;
- High profitability;
- Long tool life.
bucha-para-caixilharia-corpo-em-metal
Metal Anchor for Fixing Window and Door Frames LV045 10x182 Zinc...- Frame Fasteners Metal Body 10X182.
home
STAHLWILLE Standard Puller with Two-Armed 60 - 200 mm- Two-armed, with sliding permanently parallel extractor hooks, zinc plated;
- For extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;
- For removing ball bearings, bearing outer races and bushes from holes;
- Hooks can be used as internal or external hooks.
- For extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;
- For removing ball bearings, bearing outer races and bushes from holes;
- Hooks can be used as internal or external hooks.
home
DASSY Boston Two-Tone Work Trousers n.º 54 +/- 245 g/m² White/Grey'- These two-tone work trousers do not only have many practical pockets (include knee pockets), they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees.
- PESCO 61, +/- 245 G/M²
- PESCO 61, +/- 245 G/M²
disco-de-lamelas-para-vidro
CHEMITOOL CUTTING Ø180x22,23 mm S60 Silicon Carbide (SiC) Flap Disc- Fast cooling
- High performance
-Aggressive thinning
- Less vibration
- Thinning resistance, down to the last grain
- Great stability and job safety
- Long tool life
- Abrasive: Silicon Carbide (SiC);
- Suitable for: Hard Minerals, Stone and Composite Materials, Varnishes, Paints. Ferrous and Non-Ferrous Materials;
- Suitable Machines: Straight and Angular Grinders.
- High performance
-Aggressive thinning
- Less vibration
- Thinning resistance, down to the last grain
- Great stability and job safety
- Long tool life
- Abrasive: Silicon Carbide (SiC);
- Suitable for: Hard Minerals, Stone and Composite Materials, Varnishes, Paints. Ferrous and Non-Ferrous Materials;
- Suitable Machines: Straight and Angular Grinders.
home
STAHLWILLE Electronics Oblique Cutter, Without Bevelled Cutting Edges,...DIN ISO 9654, as nº 6613, but without bevelled cutting edges, for flush cutting of soft and medium hard Cu- and diode wires.
home
DASSY Omaha High Visibility Work Trousers n.º 38 +/- 300 g/m² Bottle...'- High visibility work trousers.
- Count on a certified protection class 1 thanks to the fluo fabric and the reflective tape.
- PESCO 64, +/- 300 G/M²
- Count on a certified protection class 1 thanks to the fluo fabric and the reflective tape.
- PESCO 64, +/- 300 G/M²
disco-de-corte-metal-estacionario
CHEMITOOL CUTTING Ø355x25,4mm Stationary Metal Cut-off Disc- High performance;
- For demanding cutting jobs;
- Multipurpose cutting work;
- Low burr formation;
- Great stability and job safety;
- Long tool life;
- Suitable for: Metal;
- Abrasive: Aluminium Oxide A;
- Suitable Machines: Stationary Cutting Machines.
- For demanding cutting jobs;
- Multipurpose cutting work;
- Low burr formation;
- Great stability and job safety;
- Long tool life;
- Suitable for: Metal;
- Abrasive: Aluminium Oxide A;
- Suitable Machines: Stationary Cutting Machines.
