Ferramenta Mandrilar A12M-STFPL 11-R
Ready to Ship
11240331
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference 11240331 | |||||
Ferramenta Mandrilar A12M-STFPL 11-R |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
Ready to Ship
- New
lima-triangular
CHEMITOOL CUTTING 125x8,5mm Second Cut Three Square Machinist File with...- Bi-material handle (ergonomic and non-slip);
- High profitability;
- Long tool life.
- High profitability;
- Long tool life.
tungsten-carbide-burr-a-cylinder-zya
FRESA TUNGS. ZYAS 1225/6 Z3PCylindrical burr according to DIN 8032 with circumferential and end cut according to DIN 8033
lima-de-metal-duro-chata
LIMA HMF 13220/2
half-masks
CHEMITOOL SAFETY 755 Double Half Mask with A1P3 Filters- Semi mask in soft thermoplastic rubber.
- 2 Reusable and interchangeable filters providing less resistance to breathing.
- Neck band with adjustment.
- Compatible with 755/756 filters for gases, vapours, particulates and combined.
- 2 Reusable and interchangeable filters providing less resistance to breathing.
- Neck band with adjustment.
- Compatible with 755/756 filters for gases, vapours, particulates and combined.
home
PFERD Polinox Hand Pads G180Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagonal Screw UNC 7/8X5 ANSI B1821
rolling-bearings
ROLAMENTO - LLRJ 1.3/8
twist-drill-din-340-n-hss-g
RUKO Spiral Bits DIN 345 - Cone Morse Nº4 HSS (Ø36,50mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
