home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
