PUNCAO + MATRIZ RED. DIAM.46-9MM
Ready to Ship
PMR46/27-09
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference PMR46/27-09 | |||||
PUNCAO + MATRIZ RED. DIAM.46-9MM |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
lamela-de-perno-para-inox
CHEMITOOL CUTTING Ø30x20x6|6x40mm Z80 Zirconia Alumina Z Shaft Mounted Flap...- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Coarse grinding;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Zirconia Alumina Z;
- Suitable for: Steel, Cast Steel, Cast Iron.
- Flexibility;
- Excellent adaptation to contours;
- Coarse grinding;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Zirconia Alumina Z;
- Suitable for: Steel, Cast Steel, Cast Iron.
home
STARRETT 150mm- 6 3753A Electronic Depth Gage without Output- Made of stainless steel.
- Absolute zero (maintains the initial zero).
- Automatic switch-off after 5 minutes of non-use.
- Engraved serial number for calibration and traceability purposes.
- Battery 3V CR2032.
- No output for peripherals.
- Absolute zero (maintains the initial zero).
- Automatic switch-off after 5 minutes of non-use.
- Engraved serial number for calibration and traceability purposes.
- Battery 3V CR2032.
- No output for peripherals.
afiadores-de-motoserra
PFERD Chain Saw Sharpeners CHAIN SHARP CS-X 4,0MMThe CHAIN SHARP CS-X chain saw sharpener stands out due to its excellent file position, ergonomic shape and easier operation. The device provides a sharpening angle of 30°.
Contents:
- One sharpener
- One depth gauge file
- Two Classic Line chain saw files
Contents:
- One sharpener
- One depth gauge file
- Two Classic Line chain saw files
escovas-de-carvao
ESCOVA
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M10X25 8.8 White...- Hexagon Head Bolt Screw Full Thread White Zinc plated;
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
home
MEGA Trolley Jack 15t- Careful design and excellent production quality thanks to the use of state-of-the-art technologies;
- The ergonomic handle with rubber grip allows for easier handling from any position.
- The ergonomic handle with rubber grip allows for easier handling from any position.
home
KING TONY 7' Extension Bar 175mm- Standard extension bar;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
disco-de-corte-inox
CHEMITOOL CUTTING Ø230x2mm Flat Inox Cut-Off Wheel- High cutting performance;
- Great stability and job safety;
- Breaking resistance;
- Does not contain iron, chlorine and sulfur;
- Long tool life;
- Suitable for: Stainless Steel;
- Abrasive: Aluminium Oxide A;
- Suitable Machines: Angle Grinders.
- Great stability and job safety;
- Breaking resistance;
- Does not contain iron, chlorine and sulfur;
- Long tool life;
- Suitable for: Stainless Steel;
- Abrasive: Aluminium Oxide A;
- Suitable Machines: Angle Grinders.
lima-tipo-faca
PFERD Files Knife DIN Series Files for Universal Use 150 mmTriangular file with knife profile, cut on two sides and the narrow edge. Version with tang. Shape G according to DIN 7261. For work on very acute-angled and narrow geometries.
sds-max-concrete-hammer-drill-4-cutters
CHEMITOOL CUTTING Ø18,0X540MM SDS-MAX Hammer Drill Bit - CX4 Performance- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
serra-craneana-hss-bimetalica-co-8
CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø68MM 8% Cobalt- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.