PUNCAO + MATRIZ RED. DIAM.46-10.5MM
Ready to Ship
PMR46/27-10.5
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference PMR46/27-10.5 | |||||
PUNCAO + MATRIZ RED. DIAM.46-10.5MM |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M24X70 10.9 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
home
DASSY Nova Work Trousers n.º 62 +/- 250 g/m² Brown/Grey'- Work trousers with knee pockets
- The tailored fit and lowered waist create a modern look, while the mechanical stretch fabric ensures a maximal freedom of movement. The water repellent fabric, adjustable, certified Cordura® knee pockets and other practical additions such as a zip-up safety pocket should put these work trousers on top of your wish list!
- PESCO 63, +/- 250 g/m²
- The tailored fit and lowered waist create a modern look, while the mechanical stretch fabric ensures a maximal freedom of movement. The water repellent fabric, adjustable, certified Cordura® knee pockets and other practical additions such as a zip-up safety pocket should put these work trousers on top of your wish list!
- PESCO 63, +/- 250 g/m²
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 65X36MM Ø3,25 DIN338 HSS-G Spiral Fully Ground Drill Bit- Excellent quality/value ratio;
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
oil-free-direct-driven-air-compressors
CHEMITOOL TOOLS Single phase belt compressor 100L 10B- Professional Quality.
- High performance compressor head.
- High volumetric efficiency.
- Cylinders in aluminium with cast iron lining or in cast iron
cast iron.
- Total protection of the transmission with high ventilation.
- Cooled head, cylinder and manifolds with a large surface area for maximum
cooling.
- Special stainless steel valves.
- Flywheel with high air output.
- High performance compressor head.
- High volumetric efficiency.
- Cylinders in aluminium with cast iron lining or in cast iron
cast iron.
- Total protection of the transmission with high ventilation.
- Cooled head, cylinder and manifolds with a large surface area for maximum
cooling.
- Special stainless steel valves.
- Flywheel with high air output.
caconete-redondo-din-en-22568-hss
RUKO Runner M DIN EN 22568 HSS - Cut To Right, Rectified (M8)- Main application Steel (N / mm²) <800, aluminum, brass and plastics
- Secondary application Bronze and cast iron
- Secondary application Bronze and cast iron
home
PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G60 12 x 330 mmFor aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
din-934-porca-sextavada
CHEMITOOL FASTENERS Hexagonal Nut Fine Pitch DIN 934 M18X1,5 |8| Plain- Hexagonal Nut Fine Pitch Plain;
- DIN 934;
- Material: |8|;
- Finishing: Plain.
- DIN 934;
- Material: |8|;
- Finishing: Plain.
home
KING TONY 3/8'F x 1/4'M Reducer Adapter with Ball- DIN 3121;
-Convert to 1/4 drive;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
-Convert to 1/4 drive;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
KING TONY H10 1/2' 6 Points Spherical Head Bit Socket 80mm- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.