- The series of long Bits DIN 340 is best suited for deep and hollow profile holes .; - Manufactured according to DIN 340; - 118 ° split point; - Enamelled silver surface.
- For universal applications from coarse to fine grinding on materials with challenging stock removal properties, e.g. stainless steel (INOX). - Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. - Abrasive: Aluminium oxide A-COOL.
- 8% Co teeth (M42); - High cutting performance; - Width from 0,6 to 80mm; - Thickness from 0,6 to 1,6mm; - Uniform welding; - Resistance to breakage; - Long tool life.
- Nitrile glove with interlock support, ventilated back and elastic cuff. - According to the European requirements for personal protective equipment (PPE) EN388 and EN420.
- Characteristics: - Angle and through-hole design; - High quality steel, chrome plated; - Deep recess at one side and open end socket at the other, easily fit over protruding studs; - ISO 2236.
- Steps firmly embedded into the side sections. - Stabilising base with non-slip rubber feet. - Inclination degree in use - 65º to 75º. - Safety locking system and quick coupling. - Safety straps to prevent excessive opening. - Aluminium sliding system placed on the sides. - Safety sleeve and extension limiter. - Built in aluminium tube 80 mm x 25 mm.
