SISTEMA CASSETES 600X112X94 VERMELHO
Available
FOX102ROSSO
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FOX102ROSSO | |||||
SISTEMA CASSETES 600X112X94 VERMELHO |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-97-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Slotted Countersunk Head Wood Screw DIN 97 4,5X40 4.8 Brass- Slotted Countersunk Head Wood Screw Brass;
- DIN 97;
- Material: 4.8;
- Finishing: Brass.
- DIN 97;
- Material: 4.8;
- Finishing: Brass.
painel-de-ferramentas
CHEMITOOL Tool Pegboard Hook Ring 80mm
home
DASSY Miami Work Trousers n.º 66 +/- 245 g/m² Black'- Work trousers with knee pockets.
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 61, +/- 245 G/M²
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 61, +/- 245 G/M²
fasteners-and-fixings
CHEMITOOL FASTENERS Mushroom Head Square Neck Bolt DIN 603 1/2X50 4.8 Plain- Mushroom Head Square Neck Bolt Plain;
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Round Head Wood Screw DIN 96 N24 6X60 White Zinc...- Slotted Raised Countersunk Head Wood Screws White Zinc plated;
- DIN 96;
- Finishing: White Zinc plated.
- DIN 96;
- Finishing: White Zinc plated.
din-7505a-parafuso-cabeca-embeber
CHEMITOOL FASTENERS Chipboard Screw Countersunk Head TORX Full Thread DIN...- Chipboard Screw Countersunk Head TORX Full Thread Passivated Stainless Steel;
- DIN 7505A;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 7505A;
- Material: A2;
- Finishing: Passivated Stainless Steel.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M18X130 10.9...- Hexagon Head Bolt Partial Thread White Zinc plated;
- DIN 931;
- Material: 10.9;
- Finishing: White Zinc plated.
- DIN 931;
- Material: 10.9;
- Finishing: White Zinc plated.
din-7505a-parafuso-cabeca-embeber
CHEMITOOL FASTENERS WOODPRO Chipboard Screw Countersunk Head POZIDRIV w/Ribs...- WOODPRO Chipboard Screw Countersunk Head POZIDRIV w/Ribs Full Thread White Zinc plated;
- DIN 7505A, LV901;
- Material: C1022;
- Finishing: White Zinc plated.
- DIN 7505A, LV901;
- Material: C1022;
- Finishing: White Zinc plated.
broca-retificada-36-hsse-co-5-ambar
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 6,70mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
home
PFERD High Performance MICRO Ø6x16mm WRC Cylindrical Carbide Burr- High surface quality;
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
chaves-de-caixa
KING TONY 1/2'DR. VDE Insulated 6PT Metric Standard Socket 24mm-The professional quality insulated socket with 1/2 square unit and 24mm working size is designed for loosening and tightening threaded fasteners.
home
BELFLEX Mounted Points 6 mm Shank F-1 40 x 20 mm- Suitable for grinding works in all kind of ferric materials;
- Convenient for adjusting moulds and dies, welding lines and inner grinding for steel pipes.
- Convenient for adjusting moulds and dies, welding lines and inner grinding for steel pipes.
cutting-tools
PFERD Abrasive Bands Aluminium Oxide A Cylindrical G150 10 x 20 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
