INDASA P500 15F 150mm Rhynofinish Disc
Ready to Ship
IN395936
- Heavy duty backing.
- Resistant to bending and tearing.
- Resistant to bending and tearing.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference IN395936 | |||||||||
INDASA P500 15F 150mm Rhynofinish Disc |
|||||||||
|
Description- Heavy duty backing. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
KRAFFT 325ml Stop Smoke OilTreatment for motor oils developed to reduce exhaust gases caused by oil combustion. For all gasoline, diesel and LPG engines, withor without turbo. For cars with excessive gray and bluish smoke emissions caused by oil combustion. Especially effective for old engines with worn parts. It can also be used as a preventive agent in the case of operation at high loads or high temperatures.
pa
DEWALT POWER-TOOLS Hex Cutter AsphaltDEWALT has a wide range of CHISELs covering most common applications. DEWALT CHISELs always deliver the best solution even in the most difficult applications.
lv-072-parafuso-sextavado-sandwich
CHEMITOOL FASTENERS Self Drilling Hex Screw Washer Head w/Two Threads...- Self Drilling Hex Screw Washer Head for Sandwich Panel White Zinc plated;
- LV072 no.3;
- Material: C1022;
- Finishing: White Zinc plated.
- LV072 no.3;
- Material: C1022;
- Finishing: White Zinc plated.
home
KING TONY 3/4' 6 Points Metric Thin Wall Long Impact Socket 23mm- 6 points metric thin wall long impact socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M6x110 8.8...- Hexagon Cap Screw Cylindrical Head White Zinc plated;
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
home
DREMEL 6,4 mm High Speed Cutter 26150125JA- 2 Pieces- 6,4 mm High Speed Cutter 26150125JA- 2 Pieces;
- Larger head with triangular shape;
- High-speed cutters are suitable for removing material in applications such as shaping, sculpting, engraving, cavity digging, grooving, grooving, inlaying, cuneiform holes or freehand milling.
- Use the sides of the head for an effective result;
- The most used handle for this accessory is the pencil type handle;
- A less aggressive and less frequent pass will always produce better results than pushing too hard or forcing the tool against thematerial;
- Use it with an angle less than 90'.
- Larger head with triangular shape;
- High-speed cutters are suitable for removing material in applications such as shaping, sculpting, engraving, cavity digging, grooving, grooving, inlaying, cuneiform holes or freehand milling.
- Use the sides of the head for an effective result;
- The most used handle for this accessory is the pencil type handle;
- A less aggressive and less frequent pass will always produce better results than pushing too hard or forcing the tool against thematerial;
- Use it with an angle less than 90'.
chave-de-caixa-curta-impacto-1-2
KING TONY 14mm 1/2' 12 Points Metric Deep Impact Socket- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
abracadeira-reforcada-isofonica-m8m10
CHEMITOOL FASTENERS Reinforced Clamp M8/M10 LV083 Ø160 Steel W1-Bracket made of 2 mm thick steel plate.
-It has a nut welded on the lower part that allows the application of rods or screws, M8 or M10.
-It has a nut welded on the lower part that allows the application of rods or screws, M8 or M10.
fasteners-and-fixings
CHEMITOOL FASTENERS Mushroom Head Square Neck Bolt DIN 603 3/8X80 4.8 Plain- Mushroom Head Square Neck Bolt Plain;
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
home
INDASA Ø150mm P120 Rhynogrip Disc Heavy Duty- High strength E wt paper combined with aluminium oxide.