STANLEY 20 Sanding Sheets for Multi Sanders - Assorted grain
Available
STA32452
- 20 sheets of sandpaper for multisander.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference STA32452 | |||||||
STANLEY 20 Sanding Sheets for Multi Sanders - Assorted grain |
|||||||
|
Description- 20 sheets of sandpaper for multisander. |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
KING TONY L Type Wrench Set Ball & Hex Two Way Type 1160MR - 6 (un.)-L Type 3-8mm Socket Wrenches with a chrome surface finish.
home
STAHLWILLE Socket 3/8' nº 45TX 15/16' Size E8For external TORX® screws, HPQ® high performance steel, chrome plated.
lamela-de-perno-para-metal
CHEMITOOL Aluminum Oxide Pernum Blade Ø40X10X6 A10
broca-cilindrica-helicoidal-centrar
DeWalt Brad Point Wood Drill Bit 16x165mm- Manufactured from chrome vanadium alloyed steel.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.
tungsten-carbide-burr-d-ball-kud
PFERD High Performance MICRO Ø8x7mm KUD Cylindrical Carbide Burr- High surface quality;
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
acessorios-para-corte-plasma
CHEMITOOL TOOLS Front Insulator for LT141-151- Front Insulator for LT141-151.
fita-de-serra-para-metal
DeWalt Cutting blades for band saws for DWE876 (2215mm x 4mm)- Premium Grade Steel
- Ultra sharp diamond ground teeth slice cleanly through the work piece producing a sandpaper fine finish (woodcutting blades only)
- Edge hardened teeth maintain ultra sharp edge
- Ultra sharp diamond ground teeth slice cleanly through the work piece producing a sandpaper fine finish (woodcutting blades only)
- Edge hardened teeth maintain ultra sharp edge
bucha-metalica-ch-parafuso-sextavado
CHEMITOOL FASTENERS Sleeve Anchor for Medium Loads w/Bolt LV041 M6X45 Ø8 A2...-Medium-duty bush with anti-rotation ring. Stainless steel A2.
home
KING TONY T-Type Universal Socket 13mm- Characteristics:
- T-type 90° universal standard socket wrench;
- 2 PC. sliding handle for easy storage.
- T-type 90° universal standard socket wrench;
- 2 PC. sliding handle for easy storage.
home
STAHLWILLE Electronics Oblique Cutter, Without Bevelled Cutting Edges,...DIN ISO 9654, as nº 6613, but without bevelled cutting edges, for flush cutting of soft and medium hard Cu- and diode wires.
home
PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G40 12 x 520 mmFor aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
