CHEMITOOL SAFETY Nitrile Coated Polyester Glove REF:7
Ready to Ship
CHS02110507
- Breathable on the back.
- Seamless mesh.
- Oil resistant.
- Abrasion resistant.
- Flexible.
- Seamless mesh.
- Oil resistant.
- Abrasion resistant.
- Flexible.
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference CHS02110507 | |||||
CHEMITOOL SAFETY Nitrile Coated Polyester Glove REF:7 |
|||||
|
Description- Breathable on the back. |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 8 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
macho-manual-din-352-esquerda-jogo
JG.MACHO ROSCA ESQUERDA M4X0.7mm
home
CHEMITOOL SAFETY Polyester Glove OILY&WET Lined with ¾ Double Nitrile Ref:9- Water resistant in the palm.
- Seamless mesh.
- Flexible.
- Extra grip.
- Breathable on the back.
- Seamless mesh.
- Flexible.
- Extra grip.
- Breathable on the back.
disco-fibra-para-inox-menor-aquecimento
PFERD Fibre Discs Fibre Discs FS Ceramic Oxide Grain CO-COOL G24 180 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
cortina-para-soldadura
Orange Welding Curtain 1600 X 1400 SOLTER
chaves-mistas
CHAVE MISTA 22MM MAXIDRIVE PLUS
home
CHEMITOOL FASTENERS Cross Recessed Raised Pan Head Screw PHILLIPS DIN 7985...- Cross Recessed Raised Pan Head Screw PHILLIPS Brass;
- DIN 7985;
- Finishing: Brass.
- DIN 7985;
- Finishing: Brass.
steel-safety-footwear
CHEMITOOL SAFETY Mugello S1P SRC HRO nº 48 Red Safety Sneakers- Composite toe cap;
- Non-metallic anti-perforation insole;
- Hi-Poly Shock-absorbing and antibacterial insole;
- Anti-static sole with impact absorption on the heel;
- Oil and hydrocarbon resistant sole;
- Penetration resistant sole;
- HRO Sole – resistance of the outsole to hot contact 300ºC;
- Model available in 3 colors: red, blue and grey.
- Non-metallic anti-perforation insole;
- Hi-Poly Shock-absorbing and antibacterial insole;
- Anti-static sole with impact absorption on the heel;
- Oil and hydrocarbon resistant sole;
- Penetration resistant sole;
- HRO Sole – resistance of the outsole to hot contact 300ºC;
- Model available in 3 colors: red, blue and grey.
home
CHEMITOOL FASTENERS Cross Recessed Raised Pan Head Screw PHILLIPS DIN 7985...- Cross Recessed Raised Pan Head Screw PHILLIPS Brass;
- DIN 7985;
- Finishing: Brass.
- DIN 7985;
- Finishing: Brass.
home
ANi Male Threaded Swivelling Elbow Fitting 50/CG M 1/4 M ø 8 mm- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21 with PTFE.
home
PFERD Rubber Drum Holders Cylindrical GK 1530/6- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
din-7972c-parafuso-cabeca-embeber-fenda
CHEMITOOL FASTENERS Tapping Screw Countersunk Head Slotted DIN 7972C 4,2x38...- Slotted Countersunk Head Tapping Screw Passivated Stainless Steel;
- DIN 7972C;
- Class: A2;
- Material: Stainless Steel.
- DIN 7972C;
- Class: A2;
- Material: Stainless Steel.