PASSADOR CABO.
Ready to Ship
KR496011
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR496011 | |||||
PASSADOR CABO. |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
PFERD Rubber Drum Holders Cylindrical GK 10040/8- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
home
DIADORA 42 Run Text Low S1P SRC ESD Safety Shoes Blue and Yellow- High abrasion resistance.
- ESD protection.
- D Light sole.
- TPU-reinforced heel.
- Light and flexible.
- ESD protection.
- D Light sole.
- TPU-reinforced heel.
- Light and flexible.
cordao-de-juntas-din-18540-astm-c1330
CHEMITOOL CHEMICALS Bottom Jointing Cord PE Ø6MM - 2500- As it is a PE based material it is inert product with a high resistance to chemical agents.
- Compatible with all types of sealants.
- Prevents adhesion of the sealant to the bottom of the joint, promoting proper sealant behaviour.
- Environmentally friendly: free of CFC, HCFC and chemical elements.
-100% recyclable.
- Flexible material, light and easy to install.
- Its fine cell structure and closed cells provide an excellent barrier effect and do not absorb water.
- Standard colour - grey.
- Volume: Cx with coil - 60x58x58 cm; Cx with 2m pieces: 204x41x62 cm.
- Compatible with all types of sealants.
- Prevents adhesion of the sealant to the bottom of the joint, promoting proper sealant behaviour.
- Environmentally friendly: free of CFC, HCFC and chemical elements.
-100% recyclable.
- Flexible material, light and easy to install.
- Its fine cell structure and closed cells provide an excellent barrier effect and do not absorb water.
- Standard colour - grey.
- Volume: Cx with coil - 60x58x58 cm; Cx with 2m pieces: 204x41x62 cm.
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø15X260MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
home
STAHLWILLE Box Spanner 30x32 mmDIN 896 Type B, made of seamlessly drawn precision steel tubing, recessed at both ends, Chrome Alloy Steel, surface polished and chrome plated.
din-916-perno-sextavado-interior-concavo
CHEMITOOL FASTENERS Hexagon Set Screw Cup Point DIN 916 M3X10 A2 Passivated...- Hexagon Set Screw Cup Point Passivated Stainless Steel;
- DIN 916 / ISO 4029;
- Material: A2;
- Acabamento: Passivated Stainless Steel.
- DIN 916 / ISO 4029;
- Material: A2;
- Acabamento: Passivated Stainless Steel.
home
KING TONY PHILLIPS® PH3 65mm Reversible Blade- 1/4 PHILLIPS® reversible blade - long head type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
chaves-de-parafusos-fenda
KING TONY Slotted Precision Screwdriver 4.0x0.80mm- Slotted precision screwdriver with round shank;
- Metric size;
- Blade material - SNCM+V with black tip;
- PP Handle;
- Rotating tip;
- Polished chrome finish;
- DIN 5263.
- Metric size;
- Blade material - SNCM+V with black tip;
- PP Handle;
- Rotating tip;
- Polished chrome finish;
- DIN 5263.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M16X60 10.9...- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 10.9;
- Finishing: Plain.
- DIN 933;
- Material: 10.9;
- Finishing: Plain.
core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS - Depth Of Cut 55,00 mm (Ø30,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS10 / RS20 / RS25e / RS30e / RS40e /
RS120 / RS125e / RS130e / RS140e
- Ejector: Ref. N° 108 305 (Ø 6,35 x 102,0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS10 / RS20 / RS25e / RS30e / RS40e /
RS120 / RS125e / RS130e / RS140e
- Ejector: Ref. N° 108 305 (Ø 6,35 x 102,0 mm)