PLACA ELECTONICA PARA MIG250M - 380V (N.
Available
CHWM250MPRSHC1
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference CHWM250MPRSHC1 | |||||
PLACA ELECTONICA PARA MIG250M - 380V (N. |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
catrabucha-circular-arame-entrancado
PFERD Wheel Brushes, Knotted - Steel Wire (ST) POS RBG 11512/22,2 ST 0,50 (10...
din-965-parafuso-cabeca-embeber-ph
CHEMITOOL FASTENERS Cross Recessed Countersunk Head Screw DIN 965 M5X8 A2...- Cross recessed countersunk head screw passivated stainless steel;
- Material: stainless steel;
- DIN 965.
- Material: stainless steel;
- DIN 965.
broca-retificada-36-hsse-co-8
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co8 (Ø 12,00mm)- Main use Steel (N / mm²) <1100, Steel (N / mm²) <1300, stainless steel and cast iron
- Secondary use Steel (N / mm²) <900, brass, bronze and synthetic materials
- Secondary use Steel (N / mm²) <900, brass, bronze and synthetic materials
home
BRALO Sealed Rivet with Boolean Head Aluminium/Stainless Steel 4X8MM- The joints are completely sealed to fluids, avoiding leakage of liquids or vapours, due to the locking of the mandrel head insidethe rivet body.
home
CHEMITOOL BY PAYPER Polo ROME Short Sleeve 180Gr White S- 100% cotton.
- Short sleeves.
- Side openings.
- Short sleeves.
- Side openings.
sets
RUKO HSS Taper and Deburring Counter Sinker Set 6PCS. Din 335 CBecause of the CBN deep-ground flutes the cutting edges are extremely sharp. Ideal for burr- and chatter-free deburring and countersinking. Best results at low cutting speeds.
fasteners-and-fixings
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 1/4X3.1/2 BSW...- Hexagon Cap Screw Cylindrical Head Plain;
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
disco-de-lixa-auto-aderentes-6f
CHEMITOOL PROGRIP WHITE 150mm G220 Self-Adhesive Sanding Disc w/6 Holes- Excellent quality/value ratio;
- Easy to use;
- Diameter from 125 to 225mm;
- Self-adhesive system;
- Uniform finish;
- Low possibility of soaking;
- Long tool life;
- Abrasive: Coated aluminum oxide;
- Suitable for: Wood, wood composites, paint and paint;
- Suitable Machines: Orbital, rotorbital or wall sander machine.
- Easy to use;
- Diameter from 125 to 225mm;
- Self-adhesive system;
- Uniform finish;
- Low possibility of soaking;
- Long tool life;
- Abrasive: Coated aluminum oxide;
- Suitable for: Wood, wood composites, paint and paint;
- Suitable Machines: Orbital, rotorbital or wall sander machine.
home
LISTA Drawer side M255 150 RAL7035- Used to cover a side end where an intermediate fill-in strip cannot be used to close an intermediate space.
broca-cilindrica-helicoidal-centrar
DeWalt Brad Point Wood Drill Bit 16x165mm- Manufactured from chrome vanadium alloyed steel.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.
