Basic Electrodes 4.0mm 95 Uni KANGAROO
Ready to Ship
E7018-40CKS
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference E7018-40CKS | |||||
Basic Electrodes 4.0mm 95 Uni KANGAROO |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
CHEMITOOL FASTENERS Linch Pin LV024 8 Yellow Zinc plated- Wired Rope Clips Yellow Zinc plated;
- LV024;
- Material: Carbon steel;
- Finishing: Yellow Zinc plated.
- LV024;
- Material: Carbon steel;
- Finishing: Yellow Zinc plated.
din-965-parafuso-cabeca-embeber-ph
CHEMITOOL FASTENERS Cross Recessed Countersunk Head Screw DIN 965 M8X45 A2...- Cross recessed countersunk head screw passivated stainless steel;
- Material: stainless steel;
- DIN 965.
- Material: stainless steel;
- DIN 965.
home
PFERD Shank Mounted End Brushes, Crimped - Brass Wire (Mes) PBU 3029/6 Mes 0,50- Suitable for light brushing such as deburring, cleaning and derusting.
twist-drill-din-338-n-hss-g
BROCA CILINDRICA HSS-G TIN DIN338 3,5MM
parafusos-rosca-para-chapa
CHEMITOOL FASTENERS Self Drilling Screw Extra Low Head PHILIPS LV109 4,2X14...-Philips Extra-Flat Self-Perfecting 4,2x14.
din-582-olhal-de-carga-femea
CHEMITOOL FASTENERS Lifting Eye Nut DIN 582 M6 C15 White Zinc plated- Lifting Eye Nut White Zinc plated;
- DIN 582;
- Material: C15;
- Finishing: White Zinc plated.
- DIN 582;
- Material: C15;
- Finishing: White Zinc plated.
din-571-parafuso-cabeca-sextavada
CHEMITOOL FASTENERS Hexagonal Head Choach Screw DIN 571 10X140 4.8 White Zinc...- Hexagonal Head Choach Screw White Zinc plated;
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.
broca-cilindrica-helicoidal-rebaixada
BROCA P/MADEIRA 18MM
home
PFERD High Performance MICRO Ø12x25mm WRC Cylindrical Carbide Burr- High surface quality;
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
