FOX Bandsaw
Ready to Ship
F28-186A
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference F28-186A | |||||||
FOX Bandsaw |
|||||||
|
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
KING TONY Camshaft & Injection Pump Sprocket Holding Tool-Use to counteract the camshaft holder or injection pump to allow the retaining bolt to be released.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 13 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
home
KRAFFT 650ml Polish (Trimmer + Polish)Controlled abrasive based polish for the detailing process of bodyworks. Silicone free. Abrasive product created to remove “orange peels”, slight clearcoat sags and small damage. Refines painted or varnished surfaces, leaving them smooth and shiny. Specially suitable for the improvement of old paint, worn out areas, overload removal, etc.
formao-cabo-bimaterial
STANLEY® Bevel Edge Chisel 32mm
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M3X8 A2...- Hexagon Head Bolt Screw Full Thread Passivated Stainless Steel;
- DIN 933;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 933;
- Material: A2;
- Finishing: Passivated Stainless Steel.
bi-metal-hss-hole-saw
SERRA CRAN. LS 59 59MM 2.5/16
chaves-de-luneta
KING TONY 24x27mm 12 Points Flare Nut WrenchOpen Ended Spanner Wrench manufactured in chrome vanadium steel, with chrome and polished finish, rounded corners that provide a greater contact area with the bolt and torques for hexagonal and grooved sides, relieving the torque on the ends, thus preventing screws and nuts from stripping quickly.
home
PFERD Scratch Brushes, Universal Use - Brass (0,30) HBU 50- General-use scratch brush for all light cleaning and rust removal jobs.
abracadeira-reforcada-isofonica-m8m10
CHEMITOOL FASTENERS Reinforced Clamp M8/M10 LV083 Ø110 Steel W1- Bracket made of 2 mm thick steel plate;
- It has a nut welded on the lower part that allows the application of rods or screws, M8 or M10.
- It has a nut welded on the lower part that allows the application of rods or screws, M8 or M10.
