DISCO MICROFIBRA BRANCO

home

PFERD CC-Grind Clamping Flange Set SFS CC-Grind-Solid 115/125 M14

- The CC-GRIND clamping flange set optimally aligns the CC-GRIND- SOLID and -FLEX in the angle grinder protective guard. This allows a very flat contact angle and thus maximum efficiency.

Available

impermeabilizante-base-de-ms-polimero

CHEMICOAT Liquid Membrane Waterproofing MS 1kg White

- Resistant to weathering and U.V. rays.
- Excellent adhesion on various types of substrates.
- Can be applied on damp surfaces.
- Paintable after drying.
- Is odourless and isocyanate free.
- Non-corrosive when boning to metal.
- Permanent elasticity and excellent adhesion.
- Interior and exterior use.
- No shrinkage.
- Remains flexible at low (-40°C) and high (+90°C) temperatures.
- Ecological (no solvents or isocyanates).
- It is permeable to water vapour.
- Applicable on horizontal and vertical surfaces.
- Transitable with use of reinforcing mesh between layers.
- Easy to apply.
- High performance 1.5 to 3.0 Kg/m2.

Available

din-7504k-parafuso-cabeca-sextavada-viga

CHEMITOOL FASTENERS Self Drilling Screw Hexagonal with Flange for Stud DIN...

-Drilling, tapping and screwing in a single operation.

Available

din-981-porca-cilindrica-dentada

CHEMITOOL FASTENERS Nut Bolt DIN 981 KM5 Plain

Available

home

PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G120 6 x 305 mm

For aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL

Available

broca-retificada-36-hsse-co-5-ambar

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 4,70mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

sargento-de-carga-media

DEWALT POWER-TOOLS Clamps (2 Piece)

-Guide bar clamps, 2 units.

Available

chave-de-parafusos-fenda

STANLEY® FATMAX® Parallel Screwdriver 3x100mm STN1-65-008

Available

fasteners-and-fixings

CHEMITOOL FASTENERS Mushroom Head Square Neck Bolt DIN 603 3/16X50 4.8 Plain

- Mushroom Head Square Neck Bolt Plain;
- DIN 603;
- Material: 4.8;
- Finishing: Plain.

Available

induzidos

SUBCONJ.DE INDUZIDO

Available

home

JG (10 PÇS) BROCAS CRAN. 14/16/18/20/22

Available

din-933-parafuso-sextavado-rosca-total

CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M18X60 8.8...

- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 8.8;
- Finishing: Plain.

Available

cutting-tools

PFERD Combidisc Abrasive Discs Zirconia Alumina Z CDR G80 75 mm

- For coarse grinding work with a high stock removal rate and a long tool life.
- Abrasive: Zirconia alumina Z.
- Recommendations for use: Use with hard or medium-hard COMBIDISC abrasive disc holders.

Available

fasteners-and-fixings

CHEMITOOL FASTENERS Flat Washer Ø30X37 Copper Plated

Available