LUNETA FIXA 180-340MM P/ CU730
Available
ZMMLUNETACU730-340
Add to cart
40,00 €
and shipping is free
|
|||
|---|---|---|---|
| Datasheet \ Reference ZMMLUNETACU730-340 | |||
LUNETA FIXA 180-340MM P/ CU730 |
|||
 |
Description |
||
PRODUCTS DATA
|
|||
16 other products in the same category:
rolling-bearings
ROLAMENTO - 99210sbd-spare-parts
LAMINA
cutting-tools
PFERD Combidisc Abrasive Discs Ceramic Oxide Grain CO-COOL CDR G60 38 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
countersinker-din-335-c-90-hss
Taper And Deburring Countersinks DIN 335 Type C 90º HSS-TiN (Ø10,4mm) RUKO
tungsten-carbide-burr-f-ball-tree-rbf
FRESA TUNGS. RBF 0618/6 Z5Tree-shaped burr with radius end according to DIN 8032 with cut conforming to DIN 8033.
home
KING TONY 4 (un.) Flat Chisel Set 11104PR10-Cold chisel set from 17 to 29 mm 4 pieces,this product is made of high quality materials to serve you for years to come.
fasteners-and-fixings
DeWALT BSC-PBZ 6x65mm Steel Wedge Nail- Hammer set anchor for push through installation.
- Simple setting process by flush hitting of overlaying pin, no setting tool required.
- Steel wedge nail with ETA part 6 approval for redundant systems.
- Simple setting process by flush hitting of overlaying pin, no setting tool required.
- Steel wedge nail with ETA part 6 approval for redundant systems.
tungsten-carbide-burr-e-tear-drop-tre
CHEMITOOL Tungsten cutter TRE 12X20-Ø6 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
home
KING TONY 3/4' 6 Points Standard Impact Socket Lightweight Type 28mm- Standard impact socket lightweight type;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
chave-de-caixa-curta-impacto-1-2
KING TONY 1/2' 6 Points Thin Wall Impact Socket 10mm- 1/2 DR. Impact thin wall socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.