PINCEL GRAFITE SOLCLEAN
Available
ST30573
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference ST30573 | |||||
PINCEL GRAFITE SOLCLEAN |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
KRAFFT 500ml STEC Clean ContactsProduct specially formulated to efficiently and quickly clean and degrease dirt from deposits that accumulate on the elements of electrical-electronic circuits.
parafusos-rosca-para-chapa
CHEMITOOL FASTENERS Tapping Screw Pan Head TORX Recess DIN 7981C 3,5x19 A2...- Tapping Screw Pan Head TORX Recess Passivated Stainless Steel;
- DIN 7981C;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 7981C;
- Material: A2;
- Finishing: Passivated Stainless Steel.
twist-drill-din-338-n-hss-g
IRWIN TCT Bit HSS PRO - DIN 338 Ø6,8x109 mm- Rectified four-sided hard metal tip;
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.
rolling-bearings
KIT - AUTO VKBA 749
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 9,20mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
din-84-parafuso-cabeca-cilindrica-fn
CHEMITOOL FASTENERS Slotted Cheese Head Screw DIN 84 M5X12 A2 Passivated...- Slotted cheese head screw passivated stainless steel;
- Material: stainless steel;
- DIN 84.
- Material: stainless steel;
- DIN 84.
home
DeWalt 250mm Brush Cutter Tri Blade250 mm three-pronged disc for trimming and removing hard grass and brambles.
caconete-redondo-din-en-22568-bsw
RUKO Runner BSW ≈ DIN EN 22568 HSS, Rectified (BSW 5/8)- Main application Steel (N / mm²) <800, aluminum, brass and plastics
- Secondary application Bronze and cast iron
- Secondary application Bronze and cast iron
home
DASSY Arizona Flame Retardant Work Trousers n.º 40 Minus +/- 340 g/m² Grey'- Flame retardant work trousers with knee pockets
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²