GERBER Fire Starter
Available
GRB1025312
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference GRB1025312 | |||||
GERBER Fire Starter |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
BETA 52MQ 10mm 1000V Insulated Socket Wrench-Open-end wrench 10mm 1000V beta insulated art. 52MQ.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M6X30 8.8 Yellow...- Hexagon Head Bolt Screw Full Thread Yellow Passivated;
- DIN 933;
- Material: 8.8;
- Finishing: Yellow Passivated.
- DIN 933;
- Material: 8.8;
- Finishing: Yellow Passivated.
textil-gloves
CHEMITOOL SAFETY White Glove made of Cotton and Polyester REF:9- Seamless support.
- PVC dots on palm and fingers, which provide greater grip and protection.
- Outer polyester resistant to a high level of abrasion.
- Antiallergic.
- Airy.
- Elasticated cuff.
- Ambidextrous.
- PVC dots on palm and fingers, which provide greater grip and protection.
- Outer polyester resistant to a high level of abrasion.
- Antiallergic.
- Airy.
- Elasticated cuff.
- Ambidextrous.
din-7505b-parafuso-cabeca-queijo
CHEMITOOL FASTENERS Chipboard Screw POZIDRIV® Pan Head DIN 7505B 5X50 4.8...
home
CHEMITOOL BY PAYPER POWER STRETCH Trousers Navy Blue M- 98 % cotton + 2 % elastane.
- Reinforced triple stitching between legs.
- Pocket for meter.
- Side pocket with LOCK SYSTEM zip.
- Reinforced triple stitching between legs.
- Pocket for meter.
- Side pocket with LOCK SYSTEM zip.
home
KING TONY 1/2' H9 6 Points Bit Socket- DIN 7422;
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
home
PFERD Combidisc Abrasive Discs Diamond CDR G251 25 mm- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
chaves-de-parafusos-torx
KING TONY TORX® Screwdriver T30 250mm- Screwdriver for TORX® head screw with round shank;
- Intern TORX®.
- Intern TORX®.
home
BETA 7903E 3XL Grey Canvas Work Overalls with Oxford Applications-Made of T/C canvas, 65% polyester, 35% cotton, 270 g/m2.
-Reinforcement inserts and pockets for knee pads in Oxford type polyester / polyurethane, 220 g/m2.
-Close with metal zip, three-button closure on the sides.
-Adjustable braces with rubber inserts, with plastic buckles for quick release.
-Reinforcement inserts and pockets for knee pads in Oxford type polyester / polyurethane, 220 g/m2.
-Close with metal zip, three-button closure on the sides.
-Adjustable braces with rubber inserts, with plastic buckles for quick release.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M30X90 8.8 Hot...- Hexagon Head Bolt Screw Full Thread Hot Dip Galvanized;
- DIN 933;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
- DIN 933;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
rolling-bearings
ROLAMENTO - 6301
home
SOLTER Plasma SOLCUT 40 60% at 40°C- Plasma cutting equipment 60Amp;
- 400V-3ph connection;
- Cuts up to 22mm;
- Complete with ground clamp and torch;
- Highly portable inverter plasma cutting system with an impressive power-to-weight ratio;
- With a cutting capacity of up to 22mm, it is the ideal system for industrial manufacturing and metal construction work;
- Cuts all types of materials such as carbon steel, stainless steel and aluminum.
- 400V-3ph connection;
- Cuts up to 22mm;
- Complete with ground clamp and torch;
- Highly portable inverter plasma cutting system with an impressive power-to-weight ratio;
- With a cutting capacity of up to 22mm, it is the ideal system for industrial manufacturing and metal construction work;
- Cuts all types of materials such as carbon steel, stainless steel and aluminum.