Founded in 1649, FISKARS is known for its experience, innovation, and quality. The Danish brand is a leading manufacturer of gardening tools, scissors, shears, and building and fixing tools.
Founded in 1649, FISKARS is known for its experience, innovation, and quality. The Danish brand is a leading manufacturer of gardening tools, scissors, shears, and building and fixing tools.
- Different types of materials can be joined, with different types of manufacturing. - Wide range of thicknesses to be riveted. - Fast, economic and high quality assembly.
For aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well. - Consistently high performance due to self-sharpening ceramic oxide grain. - Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. - Abrasive: Ceramic oxide grain CO-COOL
- Smooth and easy 18mm precision cutting. - The blade slides in and out by pressing the wheel button. - The blade can be adjusted by turning the wheel lock. - Quick and easy blade change. - Optimum cutting comfort during any job. - Suitable for cutting boxes, straps, ribbons and more. - Fits most 18mm replacement blades. - For professionals and DIY workers.
- PROFESSIONAL LINE: Suitable for light grinding of outer surfaces, and applications in steels, soldered joint, alloyed materials, stainless steel and high alloy, castiron, washes, painting, wood, plastic (Zirconium).
- Fully ground. - High drilling performance. - Available from diameter 12 up to 50mm. - Drill length 30mm (short series). - Breakage resistance. - Long tool life. - Weldon 3/4 flange.
- Flex-O-Post. - On-off switch. - V shaped bottom part of the base for clamping on tree, shaft and vice plates. - Locking lever. Tension the inner cable to lock the arm in position. - Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank. - The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions. - Clock clamp at end of arm can be rotated 360° and locked in any position. - Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank). - Vertical range of approximately 380mm (15) and horizontal range of 250mm (10) - Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
