BOSCH 162x450mm Diamond Wet Core Cutter for Concrete
Ready to Ship
BH2608601374
- Suitable for use with diamond bits designed for wet drilling
- The Diamond Wet Core Cutter for Concrete offers a long service life during wet drilling in concrete;
- The drill bit segments are laser-welded, which provides the desired strength and durability during drilling;
- The premium blend of diamonds and an optimized bond offer long-lasting use;
- In addition, the segments at the top of the core bit provide an easy start during drilling;
- This makes it possible to drill electrical installations, heating pipes, sanitary pipes, centering holes for anchors and so on;
- This wet drill bit is intended for concrete and reinforced concrete.
- The Diamond Wet Core Cutter for Concrete offers a long service life during wet drilling in concrete;
- The drill bit segments are laser-welded, which provides the desired strength and durability during drilling;
- The premium blend of diamonds and an optimized bond offer long-lasting use;
- In addition, the segments at the top of the core bit provide an easy start during drilling;
- This makes it possible to drill electrical installations, heating pipes, sanitary pipes, centering holes for anchors and so on;
- This wet drill bit is intended for concrete and reinforced concrete.
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference BH2608601374 | |||||
BOSCH 162x450mm Diamond Wet Core Cutter for Concrete |
|||||
|
Description- Suitable for use with diamond bits designed for wet drilling |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 95X62MM Ø2,5 DIN340 HSS-G Long Spiral Fully Ground Drill BitExcellent quality/value ratio;
- Fully ground;
- High drilling performance;
- Long body;
- Available from diameter 1,0 to 13mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- High drilling performance;
- Long body;
- Available from diameter 1,0 to 13mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
fato-completo-impermeavel
CHEMITOOL SAFETY M Size Green Polyurethane Waterproof Suit- ZIP covered with spring tightening.
- Adjustable at the waist through a drawstring with plastic tips. - Elastic waistband.
- Spring-loaded hem for a better fit.
- Adjustable at the waist through a drawstring with plastic tips. - Elastic waistband.
- Spring-loaded hem for a better fit.
core-drill-hss-3-4-cbn-weldon
BELFLEX Milling Cutter Magnetic Drill Short Serie 50 mm Ø 30 mm
Ready to Ship
- New
disco-auto-aderentes-rede
CHEMITOOL PRONET ULTIMATE 225mm G120 Self-adhesive Mesh Disc (Pack 5 un.)- Excellent quality/value ratio;
- Easy to use;
- Diameter from 225mm;
- Self-adhesive system;
- Uniform finish;
- High durability, up to 4x longer.
- Easy to use;
- Diameter from 225mm;
- Self-adhesive system;
- Uniform finish;
- High durability, up to 4x longer.
din-7985-parafuso-cabeca-queijo-ph
CHEMITOOL FASTENERS Cross Recessed Raised Pan Head Screw PHILLIPS DIN 7985...- Cross Recessed Raised Pan Head Screw PHILLIPS White Zinc plated;
- DIN 7985;
- Material: 4.8;
- Finishing: White Zinc plated.
- DIN 7985;
- Material: 4.8;
- Finishing: White Zinc plated.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M10X160 8.8 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
din-7972c-parafuso-cabeca-embeber-fenda
CHEMITOOL FASTENERS Tapping Screw Countersunk Head Slotted DIN 7972C 4,8x9,5...- Slotted Countersunk Head Tapping Screw Passivated Stainless Steel;
- DIN 7972C;
- Class: A2;
- Material: Stainless Steel.
- DIN 7972C;
- Class: A2;
- Material: Stainless Steel.
home
KING TONY 150mm Standard Extension Bar with Ball- Standard extension bar with ball;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M12X75 8.8 White...- Hexagon Head Bolt Partial Thread White Zinc plated;
- DIN 931;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 931;
- Material: 8.8;
- Finishing: White Zinc plated.
home
ANi German Profile Quick Fitting With Sleeve For Rubber Hose 14/A OMNI ø 8 x...- Nickel-plated brass (UNI EN 12164 CW 614N);
- COMPATIBILITY CEJN 320- RECTUS 26.
- COMPATIBILITY CEJN 320- RECTUS 26.
