DIFERENCIAL DE CORRENTE 5T

- Nut Setter, chrome vanadium alloy steel;
- Anti-rust oiled, sand-blasted;
- Non magnetic type;
- DIN 3126.

- Particularly suitable for deburring pipes, cut edges and small parts on stationary machines.
- The special wire construction with cord wire filament (LIT) is particularly suitable for heavy-duty brushing and aggressive brushing.

Extra deep, bolt clearance, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

- Resistant screen with aluminium oxide, an efficient combination.

- Intern 6 points metric deep impact socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.

-Elbow Deep Ring 75°,thin wall ring,chrome vanadium alloy steel,chrome plated.

- Two-armed, with swivelling extractor hooks and lateral clamp clip, zinc plated;
- When the clamp clip is tightened, the claws of the extractor hooks locate under the part to be extracted and lever it free as force is applied before extraction begins;
- For extracting gearwheels, ball bearings, pulleys, drop arms and similar parts from shafts or axles;
- The clamp clip presses the extractor hooks firmly against the part being extracted.

- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.

Contents:Ø 2 x 49 mm / Ø 2.5 (2pcs) x 57 mm/ Ø 3 (2pcs) x 61 mm/ Ø 3.5 (2pcs) x 70 mm/ Ø 4 (2pcs) x 75 mm/ Ø 4.5 (2pcs) x 80 mm/ Ø 5 (2pcs) x 86 mm/ Ø 6 (2pcs) x 93 mm/ Ø 7 x 109 mm/ Ø 8 x 117 mm/ Ø 9 x 125 mm/ Ø 10 x 133 mm