RIDGID 86685 Red Brush Lead
Available
RID86685
86685 Red Brush Lead.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference RID86685 | |||||||
RIDGID 86685 Red Brush Lead |
|||||||
|
Description86685 Red Brush Lead. |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
ampola-quimica
DeWALT SC-PRO Spinning Capsule M12 (10 PK)- ETA option 7 approval for uncracked concrete.
- For use in combination with chisel point threaded rods.
- Amount of mortar is exactly fitted to the drill hole diameter and hole depth.
- For use in combination with chisel point threaded rods.
- Amount of mortar is exactly fitted to the drill hole diameter and hole depth.
fasteners-and-fixings
CHEMITOOL FASTENERS Mushroom Head Square Neck Bolt DIN 603 3/8X25 4.8 Plain- Mushroom Head Square Neck Bolt Plain;
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
pferd
PFERD Collet Group Adapter 22 SPZ 3mm- Collets matched to each PFERD tool;
- Slim screw-in type for tight spaces.
- Slim screw-in type for tight spaces.
home
PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G80 30 x 533 mmFor aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
chaves-de-impacto-e-acessorios-1-2
KING TONY 16mm 1/2'' Long Imperial 6 Points Impact Socket with Joint 91mm- Impact universal joint socket with special design for confined spaces;
- DIN 3121;
- Deep Version;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Deep Version;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
chaves-de-parafusos-fenda
STANLEY® Cushion Grip Parallel Screwdriver 2.5x75mm
brocas-sds-plus-com-4-cortantes
SDS plus-5X: 5 x 50 x 110
safety-eyeware
CHEMITOOL SAFETY Glasses with UV Smoke-Free Polycarbonate Lenses- Framed glasses, smoked polycarbonate lens, with anti-scratch treatment and UV400 protection.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 11,5 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
