CINTA DE LIXA PROBELT 75X1016 TT - P120
Ready to Ship
CHA29020751016120
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference CHA29020751016120 | |||||
CINTA DE LIXA PROBELT 75X1016 TT - P120 |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
macho-maquina-m-din-376-hss-c-35-cego
RUKO Male Thread Machine M DIN 376 HSS-Co 5 VAP, Rectified (M24, L2 30,00mm)- Main application Steel (N / mm²) <800, steel (N / mm²) <1000, stainless steel, brass
- Secondary application Aluminum, bronze, plastics and cast iron
- Secondary application Aluminum, bronze, plastics and cast iron
home
STAHLWILLE VDE Heavy Duty Side Cutter, Dip-Coated Insulation Handle 250 mmDIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC. DIN EN 60900, AC/1000 V.
home
PFERD Polinox Unitized Wheels PNER-MH 7506-6 A F- Particularly suitable for work on smaller surfaces.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
din-571-parafuso-cabeca-sextavada
CHEMITOOL FASTENERS Hexagonal Head Choach Screw DIN 571 12X60 A2 Passivated...- Hexagonal Head Choach Screw Passivated Stainless Steel;
- DIN 571;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 571;
- Material: A2;
- Finishing: Passivated Stainless Steel.
din-982-porca-sextavada-autoblocante
CHEMITOOL FASTENERS Prevailing Torque High Nut With Plastic Insert DIN 982...
lamela-de-nucleo-scotch-superficies
PFERD Non-Woven Tools Polinox Unmounted Grinding Wheels PNL 15050/25,4 A G 280- Made of radially arranged flaps of non-woven abrasive material.
- A long tool life is achieved
through the dense packing of the flaps.
- This tool is mainly used for work on large surfaces.
- A long tool life is achieved
through the dense packing of the flaps.
- This tool is mainly used for work on large surfaces.
home
KING TONY PHILLIPS® PH3 110mm Reversible Blade- 1/4 PHILLIPS® reversible blade - long head type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 169x114mm Ø15 DIN338 HSS-R Roll Forged Spiral Drill- Excellent quality/value ratio;
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
painel-de-ferramentas
CHEMITOOL Tool Pegboard Screwdriver 7-12mm
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M12X130 8.8 Hot...- Hexagon Head Bolt Partial Thread Hot Dip Galvanized;
- DIN 931;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
- DIN 931;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.