- New
Datasheet \ Reference IWTF3B1521 | |||||||
1/2 REF: NB REF: TUL223/CM RANGO |
|||||||
Description |
|||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
- The reciprocating saw blade is best for cutting metal.
home
LISTA Support Base 36E 80x725x1000mm- Support base 36E (WxDxH) 80x725x1000mm Light grey RAL 7035.
home
STAHLWILLE Swedish Pattern Wrench Size 1 1/2Type A, 90°, DIN 5234. Red lacquered head and handle.
home
MILWAUKEE RED COBALT - HSS-Ground - DIN 338 Metal Drill Bits 6.0 x 93 - 10 pcs- Genuine MILWAUKEE accessories;
- Metal drill bits ground from solid extremely heat resistant cobalt-alloyed high speed steel produced according to DIN 338;
- Polished finish. Split point shaped cutting tip with 135° angle for improved centering - no center punch required;
- 5% Cobalt content withstands high drilling heat.
- Metal drill bits ground from solid extremely heat resistant cobalt-alloyed high speed steel produced according to DIN 338;
- Polished finish. Split point shaped cutting tip with 135° angle for improved centering - no center punch required;
- 5% Cobalt content withstands high drilling heat.
home
BELFLEX Automotive Multimeter UT108- Supplied with Software, RS232 Interface cable and test leads;
- Double safety insulation CAT.III 1000V, CAT.IV 600V, EN 61010-1, EN 61326-1;
- AC Voltage: 40mV/400mV/4V/40V/400V/1000V;
- DC Current: 400µA/4000µA/40mA/400mA/4A/10A;
- AC Current: 400µA/4000µA/40mA/400mA/4A/10A;
- Resistance: 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ.
- Double safety insulation CAT.III 1000V, CAT.IV 600V, EN 61010-1, EN 61326-1;
- AC Voltage: 40mV/400mV/4V/40V/400V/1000V;
- DC Current: 400µA/4000µA/40mA/400mA/4A/10A;
- AC Current: 400µA/4000µA/40mA/400mA/4A/10A;
- Resistance: 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ.
home
STAHLWILLE Guide Handle Extra Long ExtensionFor fixing and clamping cutting wire inside vehicle. Extra long extension makes it especially suited to recessed glass.
home
PFERD Rubber Drum Holders Cylindrical GK 0810/3- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.