ANI CONV Ø1,8 Paint Spray Gun
Ready to Ship
AH081607
CONV ø1,8 paint spray gun.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference AH081607 | |||||||||
ANI CONV Ø1,8 Paint Spray Gun |
|||||||||
|
DescriptionCONV ø1,8 paint spray gun. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
tungsten-carbide-burr-a-cylinder-zya
FRESA TUNGS. ZYAS 0313/3 Z5Cylindrical burr according to DIN 8032 with circumferential and end cut according to DIN 8033
home
KING TONY 1/4' 205 mm Air Ratchet Wrench-Ergonomically enhanced composite handle.
-Dual tongue design provides higher torque.
-Dual tongue design provides higher torque.
home
DeWALT TW Tie Wire Hanger 6x55mm- APPLICATIONS:
- False ceilings.
- Ventilation and suspended ducts.
- False ceilings.
- Ventilation and suspended ducts.
selante-acrilico-areado
CHEMITOOL CHEMICALS CHEMIACRYL Sandy Acrylic Sealant 300mlADVANTAGES
- For indoor and outdoor use;
- For low-motion joints;
- Resistant to sunlight, U.V. rays, rain, and snow;
- Pintable;
- Odorless;
- Contains fungicide.
INDICATIONS
- To obtain perfect adhesion, the surfaces must be clean and without traces of dust, grease, oil, water, or rust. To clean, use organic solvents (alcohol or MEK) until all the dirt is completely removed. Never use soap, detergents, or water.
- Store the product in a cool, dry, and well-ventilated place at a temperature between 5ºC and 25ºC. Keep the product away from sources of heat and humidity.
- For indoor and outdoor use;
- For low-motion joints;
- Resistant to sunlight, U.V. rays, rain, and snow;
- Pintable;
- Odorless;
- Contains fungicide.
INDICATIONS
- To obtain perfect adhesion, the surfaces must be clean and without traces of dust, grease, oil, water, or rust. To clean, use organic solvents (alcohol or MEK) until all the dirt is completely removed. Never use soap, detergents, or water.
- Store the product in a cool, dry, and well-ventilated place at a temperature between 5ºC and 25ºC. Keep the product away from sources of heat and humidity.
home
PFERD Shank Mounted End Brushes, Crimped, Knotted - Steel Wire (ST)...- Particularly flexible single-knot brush for special applications.
din-7973c-parafuso-cabeca-lentilha-fenda
CHEMITOOL Raised Countersunk Head Tapping Screw DIN 7973C 3,9x22 White Zinc...- Raised Countersunk Head Tapping Screw White Zinc Plated;
- DIN 7973C;
- Material: Steel.
- DIN 7973C;
- Material: Steel.
home
PFERD Polinox Unitized Wheels PNER-MW 12506-22,2 A F- They are especially suitable for work on fillet welds and very hard- to-reach slots or indentations.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
chaves-de-parafusos-fenda
4622SK-4-1,2X8,0X150 CHAVE FENDA
home
CHEMITOOL FASTENERS Slotted Round Head Wood Screw DIN 96 1/2X6*12X19 Brass- Slotted Raised Countersunk Head Wood Screws Brass;
- DIN 96;
- Finishing: Brass.
- DIN 96;
- Finishing: Brass.
