From A to Z, the CHEMITOOL FASTENERS offers a full range of innovate solutions - since tuning washers to cylindrical pins, from DIN 1 to DIN 82101, with sizes from M1x2 to M72x600.
From A to Z, the CHEMITOOL FASTENERS offers a full range of innovate solutions - since tuning washers to cylindrical pins, from DIN 1 to DIN 82101, with sizes from M1x2 to M72x600.
metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ® high performance steel, chrome plated.
- Suitable for GRP and CFRP with up to 40% fiber content; - Minimizes delamination and fraying with special teeth similar to PCD cutters; - Especially suitable for use in machines and robots; - Very low cutting forces; - High feed speeds and work without impacts or vibration marks, reducing tool and drive wear.
- Water-resistant; - Anti-abrasion reinforcement in the toe; - PRO AIR Waterblock ventilation system; - Anti-sprain device; - Excellent grip on all types of surfaces; - Memory Foam viscoelastic foam insole.
- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. - Consistently high performance due to self-sharpening ceramic oxide grain. - Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. - Abrasive: Ceramic oxide grain CO-COOL.
- For universal coarse grinding work with high stock removal rates. - Ideal for dressing weld seams in hard-to-reach places. - Longer tool life and higher stock removal rate when compared to abrasive discs. - Abrasive: Aluminium oxide A.
- High grinding performance and stock removal rate in general use on steel materials; - Shortened grinding times and thus cost savings due to the high stock removal rate; - Particularly suitable for work on surfaces and edges.
