ANi Female Threaded Stud Coupling For Copper Pipes 33/EF 1/4 F ø 6 mm

home

IRWIN 3 Piece Sharpening Set with Stone, Guide and Oil

-Set of three sharpening tools.
-Set includes sharpening guide, combination grinding stone and sharpening oil.
-Ideal for professional use.
-Long life and durable.

Available

mega

CILINDRO FIXO PRENSA 30T

Available

din-7337a-rebite-cego-cabeca-boleada-lac

CHEMITOOL FASTENERS Lacquered Blind Rivet Dome Head DIN 7337A Ø4x6 Black RAL...

- Blind Head Rivet Black;
- DIN 7337A;
- Material: aluminum/steel.

Available

home

KING TONY Open-Ended Slogging Wrench 10A0 27mm

- Characteristics:
- Open end slogging;
- Finished with phosphate sunk;
- DIN 133.

Available

home

LISTA Top Joint With Clamping Element 65mm

- Top joint with clamping element 65mm (minimum top thickness 30mm).

Available

abracadeira-reforcada-isofonica-m8m10

CHEMITOOL FASTENERS Isophonic Reinforced Clamp M8/M10 W1 Ø75 Carbon Steel...

-Isophonic clamps allow quick and easy installation of steel, copper and PVC pipes.

Available

cutting-tools

LIMA 2403 180 MM H2

Available

din-1587-porca-de-mama

CHEMITOOL FASTENERS Hexagon Domed Cap Nut DIN 1587 M22 A2 Passivated...

- Hexagon Domed Cap Nut Passivated Stainless Steel;
- DIN 1587;
- Material: A2;
- Finishing: Passivated Stainless Steel.

Available

uni-5587-porca-sextavada-alta

CHEMITOOL FASTENERS High Hexagon Nut UNI 5587 1,5XD M16 |6| Plain

- High Hexagon Nut Plain;
- UNI 5587;
- Material: |6|;
- Finishing: Plain.

Available

home

KING TONY 1/4 Shank Driver Studs Socket 10mm

- Threaded rod socket;
- Fastest tool available to tighten or loosen threaded rods;
- Automatic locking cams;
- Will not damage the threads when used properly.

Available

home

FORZA 150x40mm Parallel and Bracket Set

Available

tocha-mig-mag-standard

CHEMITOOL MIG Torches 150A 4 Meters

CHEMITOOL MIG Torches with 3 and 4 meters. Suitable for welding work. The nozzles have a larger or smaller diameter bore depending on the thickness to be cut.

Available

home

DASSY Miami Work Trousers n.º 42 +/- 300 g/m² Grey

'- Work trousers with knee pockets.
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 64, +/- 300 G/M²

Available

profundidade-de-corte-55mm

CHEMITOOL CUTTING Ø26 PC=55MM Annular Cutter for Magnetic Drill Machine

- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.

Available

micrometro-digital

MICROMETRO EXTERIOR DIGITAL 75-100MM IP6

Available