MACACO DE GARRAFA 3T
Available
MG-3
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference MG-3 | |||||||
MACACO DE GARRAFA 3T |
|||||||
|
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
KING TONY 3/4' 6 Points Metric Standard Impact Socket 3/4'- Standard impact socket lightweight type;
- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
CHEMITOOL CUTTING PROBELT 100x620mm G40 Sanding Belts- Excellent quality/value ratio;
- S-joint fixing support;
- Diameter from 620mm;
- Width from 100mm;
- Uniform finish;
- Use in power tools.
- S-joint fixing support;
- Diameter from 620mm;
- Width from 100mm;
- Uniform finish;
- Use in power tools.
home
KING TONY Oil Drain Plug Key Set 21 (un.)-T30 Torx Bit Socket -T45.
-Slotted screwdriver 6 sides: 8-9-10-12- 13-14-17 mm.
-Socket square: 5/16 - 3/8 - 7-10-11-12-14 mm.
-Triangular socket: 10 mm.
-Suitable for use with oil drain pan, gearbox and rear axle.
-Slotted screwdriver 6 sides: 8-9-10-12- 13-14-17 mm.
-Socket square: 5/16 - 3/8 - 7-10-11-12-14 mm.
-Triangular socket: 10 mm.
-Suitable for use with oil drain pan, gearbox and rear axle.
home
LENOX Bi-Metal Wood Cutting Jig Saw Blade 450SR 100X8X1,3 mm 10TPI Reverse...- Bi-metal Serra Blades: Ideal for working wood and metal cutting.
home
KING TONY 1/4' Internal TORX® Socket Set on Rail - 7 (un.)-Hard and wear-resistant material.
-Made from chrome vanadium silicon steel (S2).
-Made from chrome vanadium silicon steel (S2).
tungsten-carbide-burr-a-cylinder-zya
FRESA TUNGS. ZYAS 0413/6 Z3PCylindrical burr according to DIN 8032 with circumferential and end cut according to DIN 8033
home
FISKARS Classic Large Leaf Rake 65cmFiskars Classic Large Leaf Rake is a beautiful, traditional tool with shaft made from lacquered ash wood. This classically designedand finished garden rake has an extra wide head spanning 65 cm and flat, rigid and curved plastic tines which prevent leaves from sliding up and blocking the head. Rounded edges make it suitable for all types of terrain when raking leaves and general yard cleaning.Clever design of the grip apertures at the top of the rake head also enable easier removal of leaf and waste matter after a hard day's work in the garden.
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 223X135MM Ø18,5 DIN345 HSS-G Morse Taper Spiral Fully...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
