CHAVE ANGULAR 25X28MM EXPERT
Available
STN1-13-367
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference STN1-13-367 | |||||||||
CHAVE ANGULAR 25X28MM EXPERT |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
16 other products in the same category:
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
cutting-tools
PFERD Combidisc Abrasive Discs Ceramic Oxide Grain CO-COOL CDR G80 50 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
home
DeWALT Extreme 95 Piece Set-Extreme metal drills feature faster drilling, stronger construction and longer life compared to standard HSS-R drills.
home
CHEMITOOL BY PAYPER Sweat Orlando 280 g Navy Blue XL- Long sleeves.
- Round neck.
- Reinforced seams.
- Round neck.
- Reinforced seams.
equipamentos-corte-plama
CHEMITOOL TOOLS Plasma Cutting- High efficiency and high performance equipment.
- Portable.
- Integrated compressed air system (C models).
- Portable.
- Integrated compressed air system (C models).
home
DASSY Knoxville Stretch Work Jeans n.º 50 Plus +/- 390 g/m² Blue'- Stretch work jeans with knee pockets.
- CO 94, 11,5 OZ (+/- 390 G/M²)
- CO 94, 11,5 OZ (+/- 390 G/M²)
acid-and-chemical-protection-gloves
SHOWA PVC Chemical Glove 340 mm 660 Size MThe PVC 660 Chemical Glove has a triple PVC rough coating, this chemical protection glove chemical protection glove prioritises safety and comfort user. The rough grip offers high performance precision in oily or wet environments, and the soft, seamless cotton liner liner wicks away moisture to prevent odours. With design that reduces hand fatigue.
