KRAFFT 500ml STEC Oil Cutting and Threading Spray
Available
KF36773
Coolant spray lubricant with high anticorrosive power in metal cutting processes. Minimal foam formation with great defense againstskin conditions.
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KF36773 | |||||
KRAFFT 500ml STEC Oil Cutting and Threading Spray |
|||||
|
DescriptionCoolant spray lubricant with high anticorrosive power in metal cutting processes. Minimal foam formation with great defense againstskin conditions. |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-7991-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Hexagon Socket Cap Screw Countersunk Head DIN 7991 M6X30...- Hexagon Socket Cap Screw Countersunk Head White Zinc plated;
- DIN 7991;
- Material: 10.9;
- Finishing: White Zinc plated.
- DIN 7991;
- Material: 10.9;
- Finishing: White Zinc plated.
broca-escalonada-3f-hss-2-gumes
RUKO Stainless Drills, CBN Rectified, Spiral Slot With Cross Shaft HSS (Nº0/5)- Main application Steel (N / mm²) <900, aluminum, brass and plastics
- Secondary application Bronze and cast iron
- Secondary application Bronze and cast iron
home
KING TONY PHILLIPS® PH1 65mm Reversible Blade- 1/4 PHILLIPS® reversible blade - long head type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M10X75 8.8 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
lamela-de-perno-para-metal
CHEMITOOL Aluminum Oxide Pernum Blade Ø40X10X6 A60
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M14X45 10.9 White...- Hexagon Head Bolt Screw Full Thread White Zinc plated;
- DIN 933;
- Material: 10.9;
- Finishing: White Zinc plated.
- DIN 933;
- Material: 10.9;
- Finishing: White Zinc plated.
sds-max-concrete-hammer-drill-4-cutters
CHEMITOOL CUTTING Ø12,0X540MM SDS-MAX Hammer Drill Bit - CX4 Performance- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
home
KING TONY 1/2' 250 mm Reversible Ratchet 4768-10P-Reversible 1/2 ratchet.
-11° gear action (32 teeth).
-Two tooth pawl action.
-11° gear action (32 teeth).
-Two tooth pawl action.
din-125a-anilha-de-chapa-plana
CHEMITOOL FASTENERS Flat Plate Washer DIN 125A M3 A2 Passivated Stainless Steel- Flat Washer Passivated Stainless Steel;
- DIN 125A;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 125A;
- Material: A2;
- Finishing: Passivated Stainless Steel.
circular-saws
DeWalt 18V XR Li-Ion Circular Saw - Bare UnitErgonomic handle set with rubber overmold to optimise end user comfort;
-Extremely durable tool design, including a cast magnesium base for repeatitive, accurate cuts;
-Intelligent trigger allowing total control over all applications.
-Extremely durable tool design, including a cast magnesium base for repeatitive, accurate cuts;
-Intelligent trigger allowing total control over all applications.
home
Kite Brown Nobuck Safety Boot S3 SRC 36 BICAP- Water-resistant;
- Anti-abrasion protection;
- Wear-resistant lining;
- Dual-density PU sole;
- Available in small sizes.
- Anti-abrasion protection;
- Wear-resistant lining;
- Dual-density PU sole;
- Available in small sizes.
twist-drill-din-340-n-hss-g
IRWIN Bit HSS PRO with Conical Stem - DIN 345 Ø16,5x225 mm- The series of conical shank Bits with Morse taper DIN 345 are standard heavy duty Bits that are used with stationary Bits. Designed for a high resistance to breakage;
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.
lamela-de-perno-para-inox
CHEMITOOL CUTTING Ø60x30x6|6x30mm Z120 Zirconia Alumina Z Shaft Mounted Flap...- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Coarse grinding;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Zirconia Alumina Z;
- Suitable for: Steel, Cast Steel, Cast Iron.
- Flexibility;
- Excellent adaptation to contours;
- Coarse grinding;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Zirconia Alumina Z;
- Suitable for: Steel, Cast Steel, Cast Iron.
