anilha-vulcanizada-epdm
CHEMITOOL FASTENERS Sealing Washer (EPDM/Steel) Ø18mm A2 Passivated Stainless...-Suitable for watertight sealing of sheet metal joints on façades and roofs.
REBITE AÇO/AÇO C/EMBEBER 4,8X12
Ready to Ship
BR01220004812
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference BR01220004812 | |||||
REBITE AÇO/AÇO C/EMBEBER 4,8X12 |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
DASSY Dakota Flame Retardant Brace Overall n.º 54 +/- 340 g/m² Grey'- Flame retardant brace overall with knee pockets
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
macho-maquina-din-374c-35-cego
CHEMITOOL CUTTING M8 Machine Tap DIN374 – Type C HSSE Co5- Excellent quality/value ratio;
- Easy to use;
- DIN 374;
- Type C;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M8;
- Material: HSSE 5% Cobalt.
- Easy to use;
- DIN 374;
- Type C;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M8;
- Material: HSSE 5% Cobalt.
parafusos-rosca-para-chapa
CHEMITOOL FASTENERS Tapping Screw Pan Head Cross Recessed PHILLIPS DIN 7981C...- Tapping Screw Pan Head Cross Recessed Phillips Passivated Stainless Steel;
- DIN 7981C;
- Material: A2;
- Finishing: Stainless steel.
- DIN 7981C;
- Material: A2;
- Finishing: Stainless steel.
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 276X155MM Ø23,5 DIN345 HSS-G Morse Taper Spiral Fully...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
home
DISCOS LIXA SORTIDO-Sanding paper with 125mm size and abrasive size of 60G,80G,120G. -Contains 10 sandpapers in the set.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M16X20 8.8 White...- Hexagon Head Bolt Screw Full Thread White Zinc plated;
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
din-914-perno-sextavado-interior-conico
CHEMITOOL FASTENERS Hexagon Set Screw Cone Point DIN 914 M4x12 45H Plain- Hexagon sockted button head screw with cone point without finishing;
- Material: carbon steel;
- ISO 4027;
- Class 45H.
- Material: carbon steel;
- ISO 4027;
- Class 45H.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 Type N, HSS Rolled (Ø 12 mm)- High-performance rolled, steam-treated twist drill made from heavy-
duty high speed steel.
- The manufacturing procedure (no structural disruption) solidifies the
material making it more elasticated.
- This makes it more resistant to fracture and suitable for robust
drilling units. (e.g. hand-held drilling machines)
duty high speed steel.
- The manufacturing procedure (no structural disruption) solidifies the
material making it more elasticated.
- This makes it more resistant to fracture and suitable for robust
drilling units. (e.g. hand-held drilling machines)
serra-craneana-hss-bimetalica-co-8
CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø108MM 8% Cobalt- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M6X60 8.8 Yellow...- Hexagon Head Bolt Partial Thread Yellow Passivated;
- DIN 931;
- Material: 8.8;
- Finishing: Yellow Passivated.
- DIN 931;
- Material: 8.8;
- Finishing: Yellow Passivated.