- New
CHAVE IMPACTO C/PONTA HEXAGONAL 24MM
Ready to Ship
KT609524
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KT609524 | |||||
CHAVE IMPACTO C/PONTA HEXAGONAL 24MM |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
chaves-de-parafusos-philips
STANLEY® FATMAX® Phillips Screwdriver Ph4x200
percussion-drill-carbide-cutting
BROCA CRANEANA 90MM
home
KING TONY Ø9 Sheathed Pin Punch-This product is made of high quality materials to serve you for years to come.
din-916-perno-sextavado-interior-concavo
CHEMITOOL FASTENERS Hexagon Set Screw Cup Point DIN 916 M3X12 45H Plain- Hexagon Set Screw Cup Point Plain;
- DIN 916 / ISO 4029;
- Material: 45H;
- Acabamento: Plain.
- DIN 916 / ISO 4029;
- Material: 45H;
- Acabamento: Plain.
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 4,20 mm)
home
KING TONY 5/16' PHILLIPS® PH3 36mm Bit- PHILLIPS® Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
sets
RUKO HSS Taper and Deburring Counter Sinker Set 6PCS. Din 335 CBecause of the CBN deep-ground flutes the cutting edges are extremely sharp. Ideal for burr- and chatter-free deburring and countersinking. Best results at low cutting speeds.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M6X50 8.8 Yellow...- Hexagon Head Bolt Partial Thread Yellow Passivated;
- DIN 931;
- Material: 8.8;
- Finishing: Yellow Passivated.
- DIN 931;
- Material: 8.8;
- Finishing: Yellow Passivated.
sds-max-concrete-hammer-drill-4-cutters
CHEMITOOL CUTTING Ø12,0X540MM SDS-MAX Hammer Drill Bit - CX4 Performance- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
home
BETA 728L Impact Wrenches 33mm Long Series-Socket Wrenches with 3/4 square female socket, long series hexagonal, matt.
carbide-cutting-straight-shank-drill
DeWalt Mansory Drill Bit 6x200mm- Rotary/percussion masonry drill bit 130° Douglas form carbide tip.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Flat (Ø 15,00mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics